-
Anonymous users2024-01-24Kitchen sockets, unless you are installed too close to the sink is easy to splash water, generally certainly not, unless there is a problem with the design, for the sake of safety, it is not bad to install one, it can prevent oil smoke, insects, waterproof, etc....
-
Anonymous users2024-01-23I'll be happy to answer for you: it depends on where it is, if the water vapor can reach when you are cooking, then it must be installed, and it is generally uneasy when it is next to the door, but the bathroom bathroom is relatively humid, so it must be installed.
-
Anonymous users2024-01-22There is no provision in the regulations, but the height is specified to be greater than meters.
-
Anonymous users2024-01-21Safety first, the kitchen should be equipped with waterproof sockets, if you go in the water leakage, you regret it too late.
-
Anonymous users2024-01-20Generally yes.
The splashproof box comprises a protective cover plate, a function block and a function block fixing seat, and it is characterized in that the protective cover plate is a flip-type cover plate, the function block holder is a hollow body, the hollow body is provided with a limiting block, and the function block is installed in the hollow body.
One side of function block fixing seat is provided with a blind hole, two shaft seats, and a through hole is opened on the shaft seat; One side of protective cover plate is provided with positioning guide groove, two shaft holes, is connected with function block fixing seat by mandrel, mandrel is equipped with a spring, spring is embedded in cover plate positioning guide groove, and two ends are respectively stuck on blind hole and protective cover plate of function block fixing seat.
The hollow body of the function block holder is in a square shape, and there is a limiting block at the bottom of the four corners and both sides; The function block is divided into a functional body and an embedded body, and the function block is fixed in the limiting block of the function block fixing seat by a screw.
The splash-proof box has the advantages of fine mini, elegant and fashionable, waterproof, dustproof and chemical-proof, with a variety of templates, and can be replaced freely.
-
Anonymous users2024-01-19If you need to do it, let those so-called regulations go to hell.
It's better to put them all on.
In particular, it is best to install the switch of the water heater. In addition, the socket closer to the sink must be installed. >>>More
We have been using high-grade Weineng splashproof box, which has a good waterproof effect and an external size of 100*130*45mm
To understand the height of the kitchen socket, the first thing is to determine what kind of electrical appliance this socket is used, and the height of the socket installation in different electrical rooms is also different. If it is used as a range hood, it is generally about 2100 mm away from the ground, and the microwave oven is about 2000 mm from the ground. If a water heater is used, it is about 1200 mm. >>>More
It is recommended that it is better to install it safely and prevent problems before they happen! >>>More
There are two situations, 1. It is a wooden door, and it is necessary to paste the brick first and then install the door cover and door. In this way, the edge is better and more beautiful; 2. It is an aluminum alloy door or a plastic steel door, it is necessary to install the door first and then paste the brick, because the aluminum alloy and plastic steel door are relatively simple doors, it only has the door frame and no door sleeve, and the edge of the brick can not be closed, so it is necessary to install the door first and then paste the brick door edge to look good.