What are the benefits of waxing solid wood paint free floors? When is it better to play?

1. It is best to choose a good weather operation for waxing, remove the garbage and dust on the surface of the floor before waxing, and pay attention to the use of a rag to wipe the rag must be dry. When waxing, you must wait for the floor to be completely dry before you can operate, and the waxing times should be at least twice, and the waxing machine or a cloth that does not shed fluff should wipe the floor, so that the wax oil can fully penetrate into the wooden floor.

2. Before waxing the wooden floor, after waxing in the inconspicuous place on the floor of the room, let it dry for two or three hours, and the floor wax is in a semi-liquid state before use. Therefore, during the waxing process, the volatiles evaporate into solids and adhere to the floor surface.

3. If the wax is waxed or the wax is not dry, if the volatiles in the gas reach a certain concentration, it will easily lead to combustion when encountering an open flame. In order to prevent flammability, you can choose to work with low air circulation and concentration, so that when waxing, remember to leave doors and windows open. Make sure there is good ventilation.

4. When waxing, pay attention to apply carefully in the direction of the wood grain, and do not miss the coating or the thickness is uneven. Moreover, special attention should be paid to the joints of the floor, after the above work is completed, the grinding machine is used to polish and polish, the brightness of the sample will be more obvious, the surface of the wooden floor after wax is bright, easy to take care of and clean, and the floor is not easy to be worn.

Let's talk about the purpose of waxing first:

There are four entries. 1. Make up for the voids between paint molecules through wax molecules, and keep the moisture content of solid wood at 11% (neither leakage will cause dryness and bursting, nor absorb excess moisture in the air).2. Through a layer of wax film, isolate the floor from the dirt to avoid the dirt from directly touching the surface of the floor and seeping into the paint.

This makes it difficult to clean in the future. 3. Evacuate the sunlight spectrum through the wax film to avoid the paint discoloration and cracking caused by the long-term sunlight on the floor. Fourth, beautiful and shiny.

To sum up, it is: 1. Raising wood; 2. Cleaning; 3. Paint protection; Fourth, bright.

Let's talk about slippery and non-slippery.

Whether the floor wax is slippery or not depends on what wax is chosen. Natural wax is non-slippery.

Finally, the time to choose the time for the waxing of the floor.

Once the floor is laid, it is time for use (environment) and the floor needs to start adapting to the new temperature, humidity and illumination. So, waxing should be done as soon as possible.

The second purpose of waxing mentioned above is to avoid direct contact with the surface of the floor. If it's like what the foreman said (and it will get dirty), then hit it again.

Of course, whether to raise or not is the first question to be decided. My opinion is: if you decide to maintain, then do what you need to do and not be afraid of trouble. If you don't maintain it, you just don't do anything at all, so you don't have to worry and save effort.

Natural solid wood paint-free flooring is a kind of atomically combined with natural material, can not touch water, to be maintained frequently, so it must be waxed, you can buy a better quality German wax to try, very good.

After using wood floor oil, there is no need to wax.