How to solve the leakage of the bathroom floor

Updated on Bathroom 2024-09-10
5 answers
  1. Anonymous users2024-01-24

    Investigate and deal with the specific leakage place, if the sewer pipe is not treated properly, then the only way is to damage the ground and redo the waterproofing.

    If there is a problem with the trap downstairs, it is much easier to solve the problem. As long as the gusset ceiling downstairs is opened, the water trap downstairs can be treated

    I hope the landlord will solve your troubles as soon as possible、、、

  2. Anonymous users2024-01-23

    There is a product that can be waterproof without dismantling the tiles, not planing or smashing, simple and convenient, you go to TAO BAO to search for the store "Fengyun Thunderstorm 88", there is a waterproof agent sprayed on it to do waterproofing.

  3. Anonymous users2024-01-22

    It is recommended to analyze the cause of the leakage in detail and detail, and then draw conclusions after finding the cause, several students upstairs have been suggesting to repair from below, this method is not very recognized by the industry so far, but the local subtle leakage can still take this method, and it is recommended to knock on the bricks to repair the more serious ones in a large area!

  4. Anonymous users2024-01-21

    First of all, in addition to excluding the leakage of the pipe, it can be repaired from downstairs! This kind of backwater repair leakage problem is not a difficult task for those who will! Provide free professional technical consultation for concrete waterproof leakage repair!

  5. Anonymous users2024-01-20

    First check whether the sewage system downstairs of your house is broken, if not, it is your bathroom leaking, only to knock it all out, re-do the waterproofing, and reinstall the bathroom. It's just that the surface stops leaking, and the effect is not obvious.

Related questions
12 answers2024-09-10

1. The joints should be painted in place: the joints between the bathroom wall and the ground, as well as the joints between the water and sewage pipes and the ground, are prone to problems. In the construction, we must urge the workers to deal with these corners and corners, and all the waterproof coatings must be applied "in place". >>>More

4 answers2024-09-10

Use yellow sand cement to pave a layer of padding, which is the best, once and for all, or buy a non-slip mat and spread it in the bathroom, which is thicker, which can solve this problem to a certain extent.

4 answers2024-09-10

Originally, you should have discussed with the property management, during the anti-leakage warranty period, the previous construction unit was to warrant, but it is difficult to say if you got it yourself, it is recommended that you do it again, the pipe hole must not be filled at one time, so that the dry shrinkage will produce cracks, at least two times to make up, the first time to fill in half, and then fill the second time after it solidifies, and finally full of waterproof, waterproof room around the back up 20-30CM waterproof. If there is also leakage. Then you have to find the property management to be responsible for checking whether there is a problem with the water supply and drainage pipes, then it is not your responsibility.

3 answers2024-09-10

This situation cannot be completely solved – unless the floor tiles are resurfaced. The current measure is to glue a water baffle on the edge of the shower space so that the water does not flow unexpectedly. Control them to the drain!

4 answers2024-09-10

Due to their functional requirements, restrooms are the most prone to water seepage. Not only to themselves, but also to others, from the bathroom door to the downstairs caused by the controversy caused by the incident. First, the materials used in the original buildings may not have good waterproof properties, and second, if they do, they can easily be destroyed over time. >>>More