Installation of kitchen range hoods

Socket location requirements: The socket should be installed above the range hood, about 20cm below the flat roof, and avoid the air outlet of the range hood. The general recommendation for the complete installation sequence is:

Open flue holes, embed smoke pipes, ceilings, make cabinets, install smoke machine videos, dust sails, how to DIY install range hoods? InstallrangehoodYouTube·Los Angeles Chinese Information Network How Video 5 Minutes 52 Seconds Install Chinese Range Hoods in North America|What kind of installation conditions are requiredYouTube· Rosa Kitchen Research Report 6 minutes 36 seconds system safety process-safety oil pumping YouTube call Fu 2 minutes 54 seconds 1, open the flue hole (divided into two situations) do not need to install the Fangtai fire check valve situation: 2, send the hail embedded town smoke pipe 3, ceiling 4, make cabinets 5, install range hood.

1. The range hood should be installed directly above the center point of the gas cooker, and the distance between its bottom plane and the gas cooker should be within the range of 650mm-750mm.

2. Try not to install the range hood near the doors and windows and other places with strong air convection, so as not to affect the effect of the range hood.

3. The air outlet pipe should not be too long, preferably not more than 2 meters, and try to minimize bending, avoid multiple 90-degree bending, otherwise it will affect the effect of oil smoke.

This is all installed by the manufacturer who sells range hoods, so you don't have to think about it.