-
Anonymous users2024-01-241. Change the axis of the faucet.
If you want to fix the faucet leakage, you have to understand the reason for the faucet leakage, if it is because the axial gasket in the faucet is worn, then use pliers to loosen the gland bolt, and then take out the axial gasket and replace it with a new one.
2. The water-stopping tape is damaged.
Tie the faucet tightly and then use a wrench to remove the counterclockwise rotation of the faucet, and then use the threaded hole to roll it clockwise with wind printing tape six times, after getting it, re-screw the faucet, and then turn on the switch to see if there will be water leakage.
3. The joint of the faucet pipe is leaking.
Remove the cap nut from the faucet and re-tighten it or replace it with a new U-shaped gasket.
-
Anonymous users2024-01-23It depends on where the water is dripping, if it is a dripping water at the joint, it can be removed and installed tightly with raw meal; If it is the faucet itself, it will have to be replaced with a new one.
-
Anonymous users2024-01-22Change a water-saving faucet, the price is not expensive, it is guaranteed to be leaky, and the building materials city is sold.
-
Anonymous users2024-01-211. First turn off the sluice, and then remove the small screws. Look at the parts in the faucet, remove the fill nut, and turn the spool or shaft in the same direction that you turned on the faucet to unscrew them.
2. Remove the screws that hold the washer in place, and if necessary, use penetrating lubricating oil to loosen the screws. Inspect the screws and spool and replace them with new ones if damaged. Change a brand new gasket, change a new gasket normal faucet will not drip anymore.
You can see if the old gasket is beveled or flat, and remember to replace it with the same new gasket. Gaskets designed for cold water only expand violently when hot water flows through them, clogging the outlet and slowing down the flow of hot water. Some gaskets work in both hot and cold water, but make sure that the gasket you buy for replacement is exactly the same as the original.
3. Reinstall the faucet and put the button or disc back on, turn on the water supply again, and check if there is any leakage.
Hello. If it is a fast-opening faucet, you can change the valve core, and you can go to my store to see the valve core of the fast-opening faucet, and you can see it when you search for modern classic bathroom stores, and I do faucet accessories. If it is a spiral switch faucet, you can also change the rubber mat, but such a rubber mat needs to be processed by yourself, and there is generally no one to sell it on the market. >>>More
1. Change the axis of the faucet.
If you want to fix the faucet leakage, you have to understand the reason for the faucet leakage, if it is because the axial gasket in the faucet is worn, then use pliers to loosen the gland bolt, and then take out the axial gasket and replace it with a new one. >>>More
: Planning a balcony outside the living room is one of the common patterns of many house types, but considering the size of the home space and the external environment, the partition between the living room and the balcony has always been one of the problems that many people are very entangled. How to deal with it? >>>More
Close the water inlet valve first, then remove the faucet handle, then take a wrench to remove the nut, and then remove the valve core and shaft of the faucet, and the washer screw is loose, you can drip lubricating oil to solve it, if the screw and valve core are damaged, you should replace it with a new one, and finally install the faucet back.
It's so easy! There's a wrench, just buy one and change it.