-
Anonymous users2024-01-24At present, rigid materials such as cement-based waterproof coatings are mostly used for waterproofing in toilets.
Rigid waterproofing materials just can't resist cracks.
There will be no cracks with elastic waterproof coatings.
If your home building is of good quality, waterproofing will not leak if you do it casually.
If the quality of the building is average, the materials on the market can only be managed for three or five years, and then they will leak every three or five years.
Permanently protected with urea-based materials.
-
Anonymous users2024-01-23K11 general purpose waterproofing coatings are generally rigid. It is only suitable for wall and tile cladding.
The high soft waterproof material can be bent and folded, and the general four corners or yin and yang corners can be brushed with high soft waterproof material, because of its soft characteristics, even if it is vibrated and moved, it is not easy to crack.
Maybe there is a leak in LZ's own waterway, or the top layer of waterproofing is not up to standard. You can ask the master to check whether the sewer pipe is not tightly closed, focusing on the water pipe of the basin and toilet, and the workers may damage these two places if they do not pay attention during the decoration. >>>More
Eighty percent is the problem of waterproofing, what water pipe bursts, first of all, what water pipe of your water pipe, if it is PPR or PVC, it is unlikely to leak, the most likely is Rifeng pipe, many people will think that Rifeng is not very good quality? Yes, the quality is indeed very good, but his joints are sealed by rubber pads, and Rifeng pipes are mostly used to make hot water pipes, and they will definitely leak after a long time. It is impossible to see anything when the water stops, because once the wall is soaked in water, it is difficult to dry, and now there is a test of water pressure machine vibrator can see the leakage without water leakage, and the waterproof must be redone without leakage, because it is most likely that the waterproof of the ground is not done well, because the ground is not spoiled with water is even the wall 20 cm together, it is likely that the water for showering seeps into the mortar layer under the floor tiles, and the wall leaks around it. >>>More
This depends on whether the waterproof layer has been damaged, if it is not damaged, it is fine, if it is damaged, it is necessary to redo the waterproofing.
First of all, don't use polypropylene to do it, it will inevitably leak, and it will be smashed and redecorated when the time comes. >>>More
1. Determine the elevation of the ground drain, install the fixed cushion slope finding, lay the leveling layer, seal the waterproof additional layer around the floor drain, lay the waterproof layer, store the test, lay the surface layer, and place the floor drain grate; Pouring slab holes: >>>More