Should the bathroom polypropylene waterproof door frame be paved in place around it?

Updated on Bathroom 2024-03-21
2 answers
  1. Anonymous users2024-01-23

    First of all, don't use polypropylene to do it, it will inevitably leak, and it will be smashed and redecorated when the time comes.

    It is recommended that friends use good materials for concealed projects when decorating, and do not passively redecorate. Now the people have an understanding of the concealed projects such as the embedded hydropower pipelines, and the advertising slogan of "pipe" for 50 years is also deeply rooted in the hearts of the people, but they often ignore the problem of waterproofing, and do not know that the national regulations on the quality of water protection are only 5 years, which has become the short board of the concealed project, which is 90% shorter.

    It is easy to buy hydropower pipelines that have been used for 50 years, but because the national standards for waterproofing are too low, the threshold of the waterproof industry is low, the homogeneity is high, and the competition is fierce, so the general level of waterproof materials on the market is 5 years, and it is necessary to choose appropriate waterproof materials carefully, such as urea-based waterproof coatings.

  2. Anonymous users2024-01-22

    To do waterproofing, you have to do everything!

Related questions
1 answers2024-03-21

This proves that the seal of the drain is broken, or the toilet drain is not aligned with the drain mouth, and the water is reversed when flushing, which can only be dismantled and reinstalled ,--

2 answers2024-03-21

It is necessary to remove the surface layer and re-do the waterproofing, with waterproof paint treatment, at least 250mm high on the wall, and 1800mm in the shower

3 answers2024-03-21

In the bathroom, the lower part of the wall around the tube well and the yin corner of the ground should be coated with pure cement more than 200mm, and the coating thickness is the same as the thickness of the cement layer on the wall. It is generally 2 to 3 cm thick. >>>More

4 answers2024-03-21

Bathroom floor leakage, there are two common reasons, one is the leakage caused by the rupture of the pipe in the bathroom, this needs to be determined by a professional plumber by pressing the water pipe, and the other is that the waterproof layer of the bathroom itself has a problem, which is generally the use of the elimination method, if it is determined that there is no problem with the pipeline, then it should be the problem of the waterproof layer. >>>More

3 answers2024-03-21

Before each house is sold, the developer must do waterproofing at the location of the bathroom sink, but it is not excluded that some developers cut corners and did not do waterproofing. In addition, the decoration also needs to be waterproof, the location of the sinking tank and the wall need to be waterproof, if not done, the water will leak downstairs for many years! Solution: >>>More