How to solve the problem of water leakage in the shower room

Updated on Shower room 2024-08-14
2 answers
  1. Anonymous users2024-01-24

    Temporary solution for about 3 years, you can paint transparent waterproof paint on the surface of the tile, pay attention to a lot of big flickers on the market, some can really manage about 3 years, and some you have to shovel down after you finish.

    To completely solve the problem of planing off the ceramic tile and re-making the waterproof layer, the selection of national standard materials can be guaranteed for 5 years, and non-standard materials for about 3 years.

    Really solve it thoroughly, that is, never leak in the future, to choose special coatings, the price is more expensive, a square meter to 100 150 yuan of material costs, from special channels to buy.

    Don't be fooled, the market with you to pat your chest to ensure that are fooled, China's waterproof market status quo is 3 5 years. Bad money drives out good money, and good things can't enter the market, so they are sold in the periphery.

  2. Anonymous users2024-01-23

    If the shower room is used for too long, there may be a leakage in the shower room, why is there a water leakage problem in the shower room? What is the cause of a leak in the shower room? In fact, there are many reasons for a leak in the shower room, so let's listen to what the experts have to say.

    1. Why does the shower room leak?

    The reason for the general water leakage in the shower room is that the product itself has not paid attention to the waterproof problem in the design itself, and there is no rubber strip to file the water in the details such as the wall and the bottom of the bucket.

    Second, the solution to the leakage of the shower room.

    First of all, check:

    1. Whether there is no water leakage in the cold and hot water pipes (pressure pump pressure test);

    2. Whether the glass glue on the frame of the shower room is deglued (heavy glass glue);

    3. Leakage of the shower room floor (one completely solves the problem of turning over the floor tiles and re-laying, and the other uses porcelain white neutral glass glue to cut a 2-3MM concave on the surface of the floor tile junction, which can be used for 3-5 years, but not for a long time).

    If it is a good shower room, there will generally be no leakage problem, even if there is a little, a little glass glue can solve the problem. The general shower room can only rely on a large amount of glass glue.

Related questions
2 answers2024-08-14

The first is how to make reasonable use of space, then the strength of the furniture factory and the recognition of the office furniture production process, and the most important thing is the after-sales service of the manufacturer. As for the price, you have to shop around.

3 answers2024-08-14

The general leakage of the toilet bowl is the problem of the aging of the rubber ball, and the drain is easy to leak if the seal is not tight, as long as it is replaced

3 answers2024-08-14

First of all, you must pay attention to the waterproof adhesive strip and waterproof substrate of the ordinary shower room. This has an inevitable relationship with whether the ordinary shower room will leak, because the rubber strip of the ordinary shower room is best a whole strip. If there are joints, note if there are any disconnections. >>>More

2 answers2024-08-14

There are three reasons why bathroom drains stink:

1. The sealing of the toilet sewer pipe is not tight, and there is a gap between the sealing gasket of the toilet sewer connector and the cast iron or UPVC pipe. >>>More

12 answers2024-08-14

1. The joints should be painted in place: the joints between the bathroom wall and the ground, as well as the joints between the water and sewage pipes and the ground, are prone to problems. In the construction, we must urge the workers to deal with these corners and corners, and all the waterproof coatings must be applied "in place". >>>More