-
Anonymous users2024-01-24Waterproofing is divided into rigid waterproofing and flexible waterproofing. Flexible waterproofing is elastic. Generally, it is best to do waterproof twice.
One time flexible waterproofing, one time rigid waterproofing. Rigid protection flexibility. Polyurethane waterproof coatings belong to flexible waterproofing, and it is recommended that you are doing a layer of rigid waterproofing!
-
Anonymous users2024-01-23Yes, your waterproof coating is not good to buy, whether the ground is leveled, and it will not leak if it is evenly applied 2 times.
-
Anonymous users2024-01-22In general, it is not recommended to mix two kinds of waterproof coatings of the same kind, because since the bathroom has leakage, the waterproof effect of the polyurethane waterproof coating may be problematic. Therefore, it is recommended to find the cause of the water leakage first, and then remove the original waterproof coating, expose a smooth and clean cement base, and re-use the kitchen and bathroom waterproof slurry for waterproofing.
-
Anonymous users2024-01-21Bathroom waterproof coating can be used together, depending on the actual situation of the specific analysis, some can be used together, some cannot.
The waterproof coating is made of two components: 1. Acrylic emulsion is used as liquid material, inorganic matter is produced as powder, and 2. Modified asphalt is emulsified as the main material.
The former is environmentally friendly, non-toxic, and water-based. The latter is caused by a certain toxicity and is oily.
If both waterproofing materials are waterproofing coatings produced with acrylic emulsion as aggregates, they can be used together because they have the same properties, but the next one can only be used after one material has dried thoroughly.
If the two materials are produced with acrylic emulsion and modified asphalt respectively, they cannot be used together, because the two materials are not combined and are prone to delamination and peeling.
To sum up, whether the two waterproof coatings can be used together depends on the composition of the two materials, if they are the same, if they are different, they can not be used together.
-
Anonymous users2024-01-20It is a new multi-functional waterproof coating, which has the three functions of waterproofing, sand fixing and bonding, which can successfully solve the problem of cumbersome construction brought by the traditional two-component, and can also solve the problem that a single component can not be directly tiled, and at the same time can also solve the incompatibility between polyurethane waterproof and cement, and can solve the cost of waterproof reuse material construction in the toilet at one time. It is a real new composite functional waterproof coating.
Oil-based polyurethane waterproof coating is cost-effective, relatively close to the people, and can meet everyone's psychological needs.
1. Inspect and accept the appearance, variety, specification, packaging, size and quantity of materials, and form corresponding acceptance records. >>>More
Waterproof paint can be applied, but it can't replace the ceiling, because it's too ugly, and waterproof paint is not cheap.
The general bathroom leakage water is the details of the building problems, the most prone to problems in three places, we should pay attention to the three places are floor drains, wall corners, pipe roots, these three places due to more interfaces, easy to appear gaps, so easy to leak water. In addition, if the connection between the bathtub drain and the sewer pipe is not tight, it will be easy to create gaps and leakage. Therefore, we should choose a paint that is most suitable for bathroom decoration. >>>More
Waterproofing coatings are not a substitute for bathroom tiles. Waterproof coating is waterproof compared to non-waterproof coating, but it is not absolute and not afraid of water immersion. If it is exposed to long-term flooding and humidity, the waterproof coating may crack and peel off. >>>More