-
Anonymous users2024-01-24Because the bathroom itself is small in area and has many pipes, it is not recommended to use waterproof membranes such as polypropylene when doing waterproofing, because it is not convenient to cut and stick, it is relatively difficult to construct for workers, and it is easy to have a pungent smell in a poorly ventilated room, which is not environmentally friendly, so it is not recommended to use it this way.
It is recommended to use kitchen and bathroom waterproof slurry to do waterproofing in the bathroom, first use the quick-setting repair mortar to repair and strengthen, and then use the permanent waterproof slurry to do waterproofing as a whole, so that the waterproof effect is guaranteed, and the bathroom floor needs to be done all at the same time, and the wall should be at least full high, if it is a light wall, then it must be done full height, so that the waterproof effect is guaranteed.
-
Anonymous users2024-01-23Not good, the propylon cloth alone is very moisture-proof, and it should be used with waterproof paint in order to be waterproof.
-
Anonymous users2024-01-22It's not good, it will definitely leak after a year or two, and the bathroom is most suitable for waterproofing with paint.
Personally, it is recommended to use Guoerjia acrylic waterproof coating, combined with reinforced polyester cloth, and implement the construction process of three coats and one cloth or four coats and one cloth, so that the effect can achieve the ideal appearance and no leakage for more than 30 years.
The water vapor in the raw room is often relatively large, especially those bathrooms that do not separate dry and wet, and are often surrounded by water vapor after showering, so the choice of bathroom ceiling must also pay attention to its moisture-proof performance. To do bathroom roof waterproofing, it is best to apply a layer of waterproof coating on the roof of the shed, and then use PVC gusset with better waterproof performance. When the new building is delivered, the bathroom is generally waterproofed, but most of the decoration will rearrange the water and water pipelines, which will destroy the original waterproof layer of the bathroom, so the waterproof layer of the bathroom must be redone when redecorated. >>>More
The sticky tiles on the propylene are unstable and hollow].
The tarp is relatively better, with a certain tear resistance and overall waterproof performance. >>>More
Resurfacing floor tiles should be done to waterproof the floor. If you need to replace the original floor tiles in the bathroom, after chiseling off the original floor tiles, you must first level the ground with cement mortar, and then do waterproof treatment, so as to avoid leakage caused by uneven thickness of the waterproof coating. Before doing waterproofing, be sure to clean the ground and paint it 2 to 3 times with polyamide waterproof paint. >>>More