What should I do if the waterproof layer in the bathroom is too thick and can t be dried

Summary. Generally, it is brushed two or more times, and each time it is not too thick. If the brush is too thick at one time, although the outside is dry, the inside may not be dry.

What should I do if the waterproof layer in the bathroom is too thick and can't be dried

Open windows for more ventilation.

How long does it take to dry with more ventilation?

As long as the waterproof material is regular, it will dry even if it is thicker. Ordinary waterproof, dry in a day.

It should be able to dry in about three days.

It also has something to do with temperature, and the high temperature dries quickly.

You can get an electric fan to blow it down to increase the ventilation effect.

After it dries, store the water for a day and go downstairs to see if it will seep.

I'm brushing it too thick in one go, okay?

Generally, it is brushed two or more times, and each time it is not too thick. If the brush is too thick at one time, although the outside is dry, the inside may not be dry.

If the inside of the waterproof layer is not dry, it may crack and bulge.

So what to do? It's done now.

What are the remedies?

One is to re-shovel it and do it according to the normal process, but it is also a bit wasteful to delay the work.

The other is that the lack of regret is only a possibility, not that there is an absolute problem, and it will seep immediately. When the surface is dry, store water for a day to see if the water seeps and pretend to be pure. If you want to avoid water seepage, decide by yourself whether to brush the waterproofing again, then cement mortar protective layer, and then use wet mortar to paste the tiles. Clearing.

The waterproof layer of the bathroom does not dry for a long time, and the common reasons are as follows;

1.If the blending is not carried out in accordance with the requirements of the manual, water may be added without authorization or the proportion of water added is too large;

2.The weather is humid and the low temperature prolongs the drying time;

3.The ventilation of the waterproof part is not smooth, resulting in the waterproof layer is not easy to condense and dry;

4.The waterproof material is expired or the quality itself is defective, resulting in the situation that it is not easy to condense;

5.The waterproof layer is applied too thickly, which prolongs the drying time.

Therefore, it is now recommended to find the cause from the above aspects, and continue to observe the situation after ventilating more.

Summary. Kiss! Hello, a blessing, a warmth, a touch. Have a grateful heart. Life is full of touching!

Your question has been received, it will take a little time to type, please wait a moment, please do not end the consultation.

You can also take this time to provide more effective information so that I can better answer for you.

Hope mine can solve your problem and sort out the answer for you right away, please wait a moment.

What should I do if the waterproof layer in the bathroom is too thick and can't be dried

Kiss! Hello, a blessing, a warmth, a touch. Have a grateful heart.

Life is full of chaos, and there is a slow touch everywhere! Your question has been received, it will take a little time to type, please wait a moment, please do not end the consultation. You can also take this time to provide more effective information about the bending mold, so that I can better answer for you.

Hope mine can solve your problem and sort out the answer for you right away, please wait a moment.

Hello. The waterproof layer of the bathroom has not dried for a long time, and the common reasons for Liang's filial piety are as follows; 1.If the blending is not carried out in accordance with the requirements of the manual, water may be added without authorization or the proportion of water added is too large; 2.

The weather is humid and the low temperature prolongs the drying time; 3.The ventilation of the waterproof part is not smooth, and the waterproof layer is not easy to condense and dry; 4.The waterproof material is expired or the quality of the material itself is defective, resulting in the situation that it is not easy to condense and know the knot; 5.

The waterproof layer is applied too thickly, which prolongs the drying time. Therefore, it is now recommended to find the cause from the above aspects, and continue to observe the situation after ventilating more.

Do you have any other questions? I can go on and on for you 3I hope this service can help you, you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and look forward to serving you again.

You; Have a good life and all the best! 4.If you are satisfied with my service, please give Liang a praise for pure luck, and I wish you all the best!

Peace and joy.

Summary. What should I do if the waterproof layer in the bathroom is too thick and can't be dried

Hello dear! The waterproof layer of the bathroom does not dry for a long time, and the common reasons are as follows;

1.If the blending is not carried out in accordance with the requirements of the manual, water may be added without authorization or the proportion of water added is too large;

2.The weather is humid and the low temperature prolongs the drying time;

3.The ventilation of the waterproof part is not smooth, resulting in the waterproof layer is not easy to condense and dry;

4.The waterproof material is expired or the quality itself is defective, resulting in the situation that it is not easy to condense;

5.The waterproof layer is applied too thickly, which prolongs the drying time. Therefore, it is now recommended to find the cause from the above aspects, and continue to observe the situation after ventilating more.

Hope it helps!

What should I do if the waterproof layer in the bathroom is too thick and can't be dried

The waterproof layer of the bathroom is too thick, what to do if you can't dry it, hello! The waterproof layer of the bathroom does not dry for a long time, and the common reasons are as follows; 1.If the blending is not carried out in accordance with the requirements of the manual, water may be added without authorization or the proportion of water added is too large; 2.

The weather is humid, and the low temperature prolongs the drying time; 3.The ventilation of the waterproof part is not smooth, resulting in the waterproof layer is not easy to condense and dry; 4.Prevent the expiration of the water material or the quality of the material itself, resulting in the situation that it is not easy to condense; 5.

The waterproof layer is applied too thickly, which prolongs the drying time. Therefore, it is now recommended to find the cause from the above aspects, and continue to observe the situation after ventilating more. We hope to help you!