The bathroom is waterproof, and it is a general purpose type of JCDecaux, and it is also used to dip

For waterproofing in the bathroom, it is not recommended to mix waterproof paint and waterproof membrane polypropylene cloth, which not only has a complex construction cost, but also has no guarantee for the waterproof effect, so it is recommended to directly use K11 waterproof slurry general-purpose type, but after brushing the waterproof coating, in order to ensure the strength, you need to make a protective layer of mortar.

The following is the detailed construction method of K11 waterproofing slurry::

1. Clean the base surface, free of oil and dust, and sprinkle water to fully moisten.

2. Pour a bag of liquid material into the empty barrel first, and then slowly add a bag of powder, stir evenly without agglomeration. Let the slurry stand for about 3 minutes, then stir well before use.

3. Use a stiff brush to evenly coat the slurry on the base surface.

Layered construction: After the first layer is slightly dry (just not touching your hands), the lower layer can be constructed, and the painting direction is perpendicular to the first layer.

Suffice it to say: to be rich is to be capricious. Both are waterproof materials, GS is suitable for corners or places that are not good for construction, and polypropylene is suitable for large areas of walls and floors, so polypropylene is decisively selected. There is no need to use both at the same time.