Is it good to make hot oil for bathroom waterproofing

Updated on Bathroom 2024-08-24
6 answers
  1. Anonymous users2024-01-24

    According to the requirements of environmental protection, it is not good, and now it is water-based, waterproof, two-component (acrylic), and the price is not very high, which is more environmentally friendly and safe.

  2. Anonymous users2024-01-23

    For waterproofing the bathroom, it is recommended to use special waterproof materials to do it, so that the quality and age of waterproofing will be more guaranteed.

    The bathroom is not only small in area and has many pipes, but also more than 80% of the water leakage problems are concentrated in the yin and yang corners, pipes, sanitary ware, and floor drains, so these places need to be paid special attention to when doing waterproofing.

    Of course, in addition to choosing the right waterproofing material, standard construction is also important, and only in this way can the best waterproofing effect be guaranteed.

  3. Anonymous users2024-01-22

    No, isn't there a special waterproofing agent!

  4. Anonymous users2024-01-21

    Is hot oil asphalt? It is better to use cement-based waterproofing materials, not asphalt.

  5. Anonymous users2024-01-20

    Just use waterproof paint and you're good to go. There is no need to make hot oil, it is very troublesome.

  6. Anonymous users2024-01-19

    Paint for the bathroom is fine.

Related questions
2 answers2024-08-24

There are no special requirements for the season to do waterproofing in the bathroom, and it is recommended that as long as the temperature is controlled between 5-35 degrees. Because if the temperature is too high, the drying speed is too fast, it is easy to produce fine cracks, on the contrary, if the temperature is too low, it is not easy to dry, which will prolong the construction period and affect the later construction process.

2 answers2024-08-24

It is definitely not possible to directly paste tiles on polypropylene, it is necessary to make a protective layer of mortar waterproofing agent on the tile, and then wait until the mortar waterproof layer is completely dry before tiling. >>>More

2 answers2024-08-24

Now the asphalt waterproof material, the source has basically been eliminated, not only because the asphalt has a pungent smell, endangering the health of the body, but also the asphalt waterproof material, itself waterproof effect is not good, the later stage is prone to embrittlement, cracking, etc., so basically will not be used. >>>More

3 answers2024-08-24

Because the bathroom itself is small in area and has many pipes, it is not recommended to use waterproof membranes such as polypropylene when doing waterproofing, because it is not convenient to cut and stick, it is relatively difficult to construct for workers, and it is easy to have a pungent smell in a poorly ventilated room, which is not environmentally friendly, so it is not recommended to use it this way. >>>More