-
Anonymous users2024-01-24I don't know this very well
-
Anonymous users2024-01-23It is still necessary to divide the material, the material is different, the price is also different, the quotation here in Chongqing is generally as follows: K11 cement-based waterproof mortar (general-purpose) * 20 kg barrel, 298 yuan barrel, kilogram square meter layer, that is, each barrel can be constructed 7-10 square meters. Super waterproofing agent * 20 kg barrel, 198 yuan barrel, when the thickness of the waterproof layer is 10 mm, each barrel can be constructed 8 square meters after mixing cement mortar in proportion.
Based on this, you can get a rough estimate.
Toilet waterproofing practices:
1. Ground treatment.
Be sure to level the ground before applying waterproofing. Screed construction method: if there are voids, cracks and unequal defects on the base surface, repair and smooth with cement mortar.
The base surface must be firm, flat, clean, free of dust, greasy, wax, release agent, etc., and other debris substances. The construction of the waterproof layer can only be carried out after the screed is dry, and the construction should be fireproof and waterproof during the construction. After the waterproof layer is completed, the finished product should be protected, and no one should walk around.
2. Wall treatment.
About 300mm high waterproof paint should be used for wall treatment to prevent water from penetrating the wall and returning moisture.
The painting height between the wall and the floor (plane and façade) of the bathroom should be greater than 100mm.
If there is a shower in the bathroom, the waterproof height of the room is not less than 1800mm.
If there is a bathtub, the waterproof height of the wall adjacent to the bathtub should be 300mm higher than the bathtub.
The waterproof height of the bathtub is not less than 800mm.
The waterproof height of the squatting pit should exceed the ground of the squatting platform by 400mm.
For the light wall of the bathroom renovation and the self-built light wall, it is recommended that the waterproof height should be at the top.
3. Do a closed water test.
After the waterproofing construction is completed, the water storage test is carried out. Block all the drains in the bathroom, build a water barrier about 200mm high at the door, and then pour about 20mm 30mm deep water into the bathroom, and check whether there is leakage on the surrounding walls and the ground after 24 hours, the waterproof experiment is the key to ensure the quality of the bathroom waterproof project, and it must be done. If there is no leakage after more than 24 hours, it is considered qualified.
If water leakage is found, the water storage test should be stopped immediately, the waterproof layer should be re-improved, and the water storage test should be carried out after the treatment is qualified.
-
Anonymous users2024-01-22It depends on what you need to do, whether it is big or small, and it depends on the size of your area.
Hello, most of the waterproofing of the bathroom is charged according to the square, including waterproof materials and artificial parts. Generally, a bucket of waterproof paint is 5 kilograms, the price is about 100 yuan, each barrel can be used 5 square meters, 1 square is about 20 yuan, so the general bathroom is about 200 yuan of material costs, in addition to the labor cost is 150 yuan, so that it is all completed.
You can buy ready-made waterproof curtains according to the size of the bathroom, and twenty or thirty yuan will do. >>>More
The price depends on what kind of material it is, such as: K11 cement-based waterproof mortar (general-purpose) * 20 kg barrel, 298 yuan barrel, kilogram square meter layer, that is, each barrel can be constructed 7-10 square meters. Wangu super waterproofing agent * 20 kg barrel, 198 yuan barrel, when the thickness of the waterproof layer is 10 mm, each barrel can be constructed after mixing cement mortar in proportion. >>>More
The cost of waterproofing alone is not high, because waterproof construction is not difficult, but waterproof design requires experienced masters. If it is the cost of water leakage treatment, you need to see the difficulty of the leakage situation to determine the cost, the local treatment is not high, if it is the entire waterproof failure, you need to re-pry the brick to do waterproofing, the cost is thousands, and the construction period is about a week, in terms of dealing with house leakage, there is a Youpai shield waterproof plugging, which is specially made for this, you can find them to learn more about it.
The bathroom is divided into dry area and wet area, the dry area is 60 cm, the wet area is meters, and the specific price depends on what city you are in.