How to decorate a kitchen with a heating stove in the countryside

This should be able to put a liquefied gas stove, there is not much good relationship between the two, and you will not heat the temperature to the temperature of the liquefied gas cylinder when you install a heating stove.

1. Installation location, household coal-fired heating stove can not be installed in the bedroom or the room directly connected with the bedroom to prevent gas poisoning. 2. A pressure reducing pipe should be installed at the outlet of the household coal-fired heating furnace, and its diameter should not be less than the pipe diameter. 3. When the circulation is not good due to non-obstructive reasons such as too long pipeline, the position difference between the household coal-fired heating furnace and the radiator can also be further increased to promote water circulation, otherwise a small hot water pipeline pump should be added to force water circulation. >>>More

Easy control of air supply. Pull a pipe to the shower or bathroom.

This connection method is not very good, generally speaking, there are only two sets of radiator plates, 80 furnace should be very hot, from the picture is a natural cycle, why is there no water tank, two sets of radiator plates, water supply from the middle position, the exhaust pipe is on one side, there should be residual air in the water inside, there is no regulating valve for water supply and return, you should find a local plumbing to take a look, a little change is good、--

If you deflate a large amount of gas, it will be hot, and where will the heat of your stove go? >>>More