-
Twist it out with a tiger insert, if it doesn't work, open it with a manual note
-
Let's find a professional master to solve it. Encountered.
Because the outer wire connection part of the angle valve that is broken in the elbow, although it is partially broken inside, it is very troublesome. >>>More
You try it first, the connector is unscrewed together, and the joint can be replaced after unscrewing, if the joint cannot be screwed, then you can only find a reverse threaded tap that is consistent with the size of the broken angle valve, and screw it into the broken end, which can unscrew the broken end.
Check whether there is any residue of the bad valve in the wire mouth, and after cleaning it, you can screw the new valve.
Just disassemble it as you would normally dismantle other faucets, and turn the wrench counterclockwise through a gap at the root of it.
If there is a little bit on the outside, you can clip it out with nail clippers, and if it is broken inside, you can only call the lock cylinder to be unlocked.