What should I do if the main valve of the kitchen faucet leaks and can t be closed

Updated on Kitchen 2024-08-17
4 answers
  1. Anonymous users2024-01-24

    The valve in front of the water meter is closed and the faucet is replaced with a new one.

  2. Anonymous users2024-01-23

    If the faucet is leaking, it would be nice to replace it with a new one.

  3. Anonymous users2024-01-22

    If it can't be closed, it should be a broken valve, and you have to replace it with a new one. Lidian valve industry.

  4. Anonymous users2024-01-21

    Isn't there an angle valve under the faucet?

Related questions
2 answers2024-08-17

: Planning a balcony outside the living room is one of the common patterns of many house types, but considering the size of the home space and the external environment, the partition between the living room and the balcony has always been one of the problems that many people are very entangled. How to deal with it? >>>More

4 answers2024-08-17

1. Water leakage at the water outlet: The kitchen faucet leaks, and the water leakage at the water outlet is caused by the wear of the shaft gasket in the faucet. Solution to a leak at the outlet: >>>More

2 answers2024-08-17

The part of 3 in the figure is a screw rod downwards to put a rubber ring (to play a sealing role to prevent downward leakage), and then through the basin, there is a nylon lock nut from below to tighten, play a fixed role! You first check if the rubber ring doesn't work, and then check if there is a dew point in the screw part (some brand faucets are made of recycled materials, and the service life will not be very long)!

18 answers2024-08-17

First, loosen the faucet from the bottom of the vegetable basin, remove it and then look at it, and the visual inspection should be the aging and leakage of the leather ring in the middle. >>>More

2 answers2024-08-17

You look at the little eye of your circle to see if there is a little Rose to pull it back and then up the water pipe, if possible, change two O-rings, you can also try to deal with it simply, pick off the O-rings and wrap a few turns of raw material tape in the trough.