-
Anonymous users2024-01-24Normal is 300 There are also 400 ones, 300 is the majority, you go to the toilet first, and then make the pipe according to the toilet pit distance is OK. Otherwise, you can only choose the toilet according to the existing pit distance.
-
Anonymous users2024-01-23The pit distance is the distance from the center of your tube to the wall, you measure it, and the national standard is 30.
Is that mouth offset? You can buy a disposer - the plumbing store sells it.
Ascend higher than the ground 100, according to the toilet model from the wall to leave the size, generally 300 applicable, the bottom 90 degree door bend to connect the main pipe, the end of the pipe closed to prevent objects.
If the toilet was originally unblocked, now this is the case, you don't want to dismantle the toilet first, you first go to the people below, negotiate with them, open the toilet water storage elbow above the ceiling of his bathroom, this place may have straw paper or something to block, if there is nothing in the water storage bend, please dredge a professional to dredge this level of pipe, I think it will definitely solve the problem, if this can not be solved, you ask a plumber master to remove the toilet, do not dismantle it yourself, the foot is easy to break. I hope you find my answer helpful.
It doesn't matter if the soap is soaked, it will soak soft after a long time, and it will be fine to rinse it with hot water a few times tomorrow.
The principle of the flush toilet is mainly the siphon principle, and the schematic diagram of the flush toilet is also based on the siphon principle. The "pumping" of the flush toilet refers to the S-shaped bend under the toilet, and when the water surface in the toilet exceeds the high point of the S-bend, the siphon phenomenon is formed, which can pump the water and dirt of the toilet together. Until only a small amount of water remains, the siphon destroys, leaving a small amount of water, forming a water seal. >>>More