-
Anonymous users2024-01-24It should be that one of the sockets in your kitchen is not in good contact, or there is a problem with the appliance - the problem with the appliance is more likely, of course, it is also possible that the controller (air switch) of the sub-circuit is a little smaller. Suggestion: Find an electrician to do a multimeter to do a check, and see if the capacity of the air switch matches the power of the appliance.
-
Anonymous users2024-01-23First, tighten the air opening of each line joint, use the clamp meter to measure the running current, to see whether the air opening used is small, and then whether there is leakage of the line.
No trip can only mean that there is no short circuit. Rather, it is combustion caused by overheating of the motor or line.
Eliminate the short circuit and water leakage, see if there is a small white square button on the top of the empty open, if there is one, press it down, and then open it. If not, take this route to another road and try it to know what the reason is.
Summary. Hello Kiss is happy to answer this question for you. <> >>>More
The kitchen goes into the cupboard, and the bathroom goes straight in from the outside, and the outside wall is repaired.
Sewer blockages have nothing to do with empty tripping, one belongs to the water system and the other belongs to the electrical system.