What is the reason for toilet flushing and hot water fire

There are several possible reasons why a toilet flush is weak: >>>More

The toilet flush is not enough, and the toilet is not flushed clean, which may be a problem with the toilet shifter, that is, the water outlet of the toilet is not directly facing the sewer pipe, and there is a curve in the middle, which is connected when the toilet is installed. It is also possible that the toilet is blocked, after the toilet is blocked, when flushing, the water level will slowly rise, and the toilet will not be flushed. It is also possible that when you use it, you don't have a good reason to do it, and you don't let go when you press the flush button, which will also cause the impulse to be insufficient, and you must press it for 2-3 seconds, so that you can completely open the flush valve, and the flushing effect can be the best.

There must be a short circuit in it, it may be a line, or it may be a motor.

1.It may be that the filter is clogged with limescale and the toilet bowl is not pumping. >>>More

Under normal circumstances, any flush toilet, 4-5 years of use will be fouled, the original smooth ceramic surface of the fouling, it seriously affects the drainage capacity of the toilet, resulting in the inability to flush in time, slow drainage, which is usually caused in the process of use, generally the only longer way to appear this phenomenon is to replace the toilet, even if it is descaled in various ways, the siphon elbow inside the toilet can not be completely removed, there is a temporary improvement, and this phenomenon will still appear after a while. >>>More