-
Anonymous users2024-01-24If it is determined that there is indeed a leakage phenomenon, you can use a megohmmeter to shake the insulation value of the line under the premise of disconnecting the power supply, and the low resistance value is the line with leakage, find the cause of leakage (generally the connection point of the line is poorly insulated), and do a good job of insulation.
n Your empty open is burning, change it. You remove the lower outlet of the bathroom switch, and in the case of falling the brake, the lower terminal is also electrified.
Well, if there is an electricity leak in the shower, it will basically electrocute people immediately, which is too dangerous! If you are using a storage water heater, you should first heat the water in the storage bucket, and then turn off the power and unplug it after it is done, so that the power is completely cut off, and then you can turn on the faucet to take a bath, which is the safest way. >>>More
First of all, the wire head in the junction box is treated with adhesive tape, and then buy a waterproof switch box on the switch, and it will be fine to close the waterproof box when taking a bath at night, and you can buy it at the hardware store. Buy a better one, about ten yuan.
Hello, you are obviously caused by moisture or loose terminals, when the accumulation reaches a certain time to reach the rated power of the leakage protector, it will automatically jump to protect the entire electrical equipment.
It was when it was decorated, and the wires buried inside leaked. >>>More