What is the division of the bathroom waterproof coating?

Toilet waterproofing should belong to the ground subdivision of the decoration division project.

There are many materials for waterproofing in the bathroom, and the waterproofing project should be a hidden project!

There is no specific division of labor, plumbers can also do it, and masons can do it. Only if you come up with the right price, they will do it. My family said that they would do it themselves, and the mason said that it would cost 17 or 18 yuan a square meter now, and asked me to do it myself to save some money.

After the water and electricity are good, clean the bathroom floor, and there is no floating and sinking. Then make the ground wet, there can be no open water, and use a waterproof brush to make 2 times odd and even, with an interval of 4-8 hours between each time.

Mason's work.

It's part of the stucco.

Waterproof construction is relatively simple, and water, water, and masonry should be able to be done.

Home decoration, water and electricity reform first, after the completion of water and electricity transformation, immediately to do waterproofing. It should be noted that waterproofing should be done as much as possible at the base layer of the structure.

Grassroots requirements: 1. The base must be firm, smooth and clean, without oil stains, floating ash and other substances that affect the adhesion of the base layer;

2. Some obvious voids, cracks and other defects of the base can be repaired and smoothed with cement mortar in advance;

3. Before the slurry is painted, the dry base layer should be fully moistened in advance, but there should be no obvious water accumulation.

Construction requirements: 1. Use a brush or roller to directly brush on the wetted base surface, and the strength should be used evenly, and the brush should not be missed;

2. When painting for the second time, the construction should be carried out after the first dry solidification, and the direction of each two layers should be perpendicular to each other, so as to achieve the best coverage effect;

3. The thickness of each layer of coating should not be too thick, and it is more suitable to be less than 1mm, which is conducive to curing and curing.

Maintenance requirements: 1. After the construction is completed, the coating should be protected as necessary, and pedestrians are prohibited from stepping on it, rain erosion, sharp objects and blunt objects are prohibited;

2. For deep underground buildings with poor air circulation, mechanical ventilation methods can be used to speed up the drying and solidification of the coating film for the progress of the project.

Kiss, <>

Very good to answer the bathroom waterproof coating belongs to the roof waterproof division project, which can ensure that the building is not eroded by water and prolong the service life of the building, so it is necessary to do a good job of waterproofing treatment for the bathroom, if it is not dealt with, the later water seepage will affect themselves and their downstairs neighbors, so the waterproof project is very important. Extended informationWaterproof coating is a one-component waterproof coating prepared by adding other additives to pure acrylic polymer emulsion emulsion. The waterproof film formed after curing has certain extensibility, elastic molding, crack resistance, impermeability and weather resistance, and can play a role in waterproofing, seepage prevention and protection.

It has good temperature adaptability, easy operation, easy service and maintenance. Hope mine can help you! <>

Toilet waterproofing belongs to the roof waterproofing division project.

The waterproofing project of the roof is a subdivision of the construction project, which is often the content of the construction of the roof surface layer, but also includes a waterproofing project of the roof and the engineering role of the thermal insulation of the roof. Often, some roofs above the structural layer are composed of leveling layers, air insulation layers, thermal insulation layers, or waterproof layers, protective layers and surface layers.

Roofs can be divided into flat roofs, sloped roofs or special-shaped roofs according to their forms, and can be divided into non-mastered roofs and mastered roofs according to their use functions, and at the same time, they can be divided into thermal insulation roofs and non-thermal insulation roofs according to their thermal insulation functions.

Bathroom waterproofing should belong to the ground sub-division of the decoration and decoration division of the project, the decoration and decoration division project includes the following 10 sub-divisions:

Floor plastering. Doors and windows suspended ceilings.

Lightweight partition walls. veneer (brick).

Curtain wall (revised draft for comments, to extract it separately as a separate project: called "building curtain wall") coating and pasting and soft package details.

Waterproof construction is relatively simple, and water, water, and masonry should be able to be done.

Big brother, don't be so misleading, it's the building ground isolation layer.