-
Anonymous users2024-01-24The wall of the new house itself is not too stable, and organic binders are used, and it is estimated that the waterproof material is also a little problematic, and the expansion rate is different. It is recommended to redo the bricks with mortar!
-
Anonymous users2024-01-23The problem lies in your waterproofing material and Weber binder.
Either the waterproof coating is not good, which leads to the hollowing phenomenon in the later stage; Either that's caused by a problem with the adhesive.
Generally, it is enough to paste wall tiles with cement, and there is no need to use special adhesives.
-
Anonymous users2024-01-22Clean the surface of the waterproof layer, first use 107 glue, polyvinyl acetate emulsion and cement mixed brushing, and wait for the brushing to dry and have strength (after drying, break it by hand, and carry out the next process when it is strong) and then use cement mortar to paste the wall tiles. I'm a hardcover, and if you don't understand something, ask me again.
-
Anonymous users2024-01-21It's best to find a larger decoration company where reliable Clean up the surface of the waterproof layer, first use 107 glue, polyvinyl acetate emulsion and cement mixed brushing, and wait for the brushing to dry and have strength (after drying, break it by hand, and carry out the next process when it is strong) After that, use cement mortar to paste the wall tiles. I'm a hardcover, and if you don't understand something, ask me again.
-
Anonymous users2024-01-20The problem is in the binder, the waterproof layer is the same as his name, it is waterproof, but it is not breathable, that is, your adhesive cannot completely dry at the right time, so the effect is not ideal.
It is recommended that you still hang bricks on cement. The binder is only what we use to repair the bricks.
-
Anonymous users2024-01-19It is recommended to use sand cement to paste the wall tiles.
-
Anonymous users2024-01-18Hello! Clean up the surface of the waterproof layer, first use 107 glue, polyvinyl acetate emulsion and cement mixed to touch the potato and pull the hair, and wait for the hair to dry and have strength (after drying, break it by hand, and enter the next process of the ant faction when it is strong) and then paste the wall tiles with cement mortar.
I'm a hardcover, and if you don't understand something, ask me again.
Typing isn't easy, oh!
-
Anonymous users2024-01-17The problem is that the high comic binder here, the waterproof layer is the same as his name, it is waterproof, but it is not breathable, that is, your binder cannot be completely dried at the appropriate time of Ming Nian Sakura, so the effect is not ideal.
It is recommended that you still hang bricks on cement. The binder is only what we use to repair the bricks.
1. The treatment of the wall base is not very smooth, which will lead to the occurrence of hollowing, the reason: the tensile force of the tile of the uneven base of the wall is not the same, so that the high part will pull up the ground department after a long time; 2. When pasting tiles, the construction master's tile pressing will also lead to hollowing, the reason: the unreal pressure will leave air in it, and the putty of the base layer will dry for a long time, and the air in the air will still exist and will bulge.
The ceramic tile has a large area of hollowing, and the technicians of Gulai Building Materials summarized the following reasons: >>>More
Abstract Wet paving is easy to cause hollowing, because the mortar contains high moisture, and when drying, it is easy to form cavities, resulting in the floor tiles can not be fully bonded with the base layer, resulting in the phenomenon of hollowing. >>>More
First, the expansion gap between the floor tiles and the floor tiles and the surrounding walls is too narrow, and when the room temperature changes drastically, the floor, cement layer and ceramic tiles will appear thermal expansion and cold contraction. If the gap is too thin and there is not enough space for the tile to "stretch", the tile is easy to arch, which is generally easy to appear in the northern region, while the south is not easy to appear due to the high humidity and small temperature difference. >>>More
It's time to knock it off and re-pave it.
It is best to choose the re-paving material by yourself, choose a good material, if it is contracted to an outside master, you may cut corners on the material. Paving should also be supervised. This kind of thing should be taken seriously. >>>More