-
Anonymous users2024-01-23Abstract Wet paving is easy to cause hollowing, because the mortar contains high moisture, and when drying, it is easy to form cavities, resulting in the floor tiles can not be fully bonded with the base layer, resulting in the phenomenon of hollowing.
In order to save materials and time, some construction workers do not plaster sand plaster in the middle of the floor tiles, but only plaster sand plaster at the four corners and pave the floor tiles. When first laid, the floor tiles look firm, but over time, the tiles will bulge due to different expansion coefficients.
The bathroom wall tiles are hollow in a large area, and which technical department is to find to do technical appraisal. Please.
Tile hollowing is the responsibility of the decoration construction party, if the tile appears hollow, it is generally caused by improper construction, when laying tiles, the mortar of cement mortar is relatively thin; Or when the floor tiles are paved, the cement slurry has dried; Or there are contaminants on the back of the floor tiles that are not cleaned, etc. You can find a contractor to repair it for you.
Tile stickers are not empty at all for any reason.
The wall is brushed through the wall.
It is mortar and the like that are not completely filled between the tiles and the wall.
The material is made of rainbow tile adhesive.
The walls do not stick to the tiles and cement.
Wet paving is easy to cause hollowing, because the mortar contains higher moisture, and when drying, it is easy to form cavities, resulting in the floor tiles can not be fully bonded with the base layer, resulting in hollowing. In order to save materials and time, some construction workers do not plaster sand plaster in the middle of the floor tiles, but only plaster sand plaster at the four corners and pave the floor tiles. When first laid, the floor tiles look firm, but over time, the tiles will bulge due to different expansion coefficients.
-
Anonymous users2024-01-221. The treatment of the wall base is not very smooth, which will lead to the occurrence of hollowing, the reason: the tensile force of the tile of the uneven wall base is not the same, so that the high part will pull up the low part after a long time.
2. When pasting tiles, the construction master's tile pressing will also lead to hollowing, the reason: the unreal pressure will leave air in it, and the putty of the base layer will dry for a long time, and the air in the air will still exist and will bulge.
The ceramic tile has a large area of hollowing, and the technicians of Gulai Building Materials summarized the following reasons: >>>More
First, the expansion gap between the floor tiles and the floor tiles and the surrounding walls is too narrow, and when the room temperature changes drastically, the floor, cement layer and ceramic tiles will appear thermal expansion and cold contraction. If the gap is too thin and there is not enough space for the tile to "stretch", the tile is easy to arch, which is generally easy to appear in the northern region, while the south is not easy to appear due to the high humidity and small temperature difference. >>>More
It's time to knock it off and re-pave it.
It is best to choose the re-paving material by yourself, choose a good material, if it is contracted to an outside master, you may cut corners on the material. Paving should also be supervised. This kind of thing should be taken seriously. >>>More
Judging from the situation you described, the waterproofing of your home has not been concealed. That's a lot easier. Here's a way for you to remove all the waterproofing that was originally made. >>>More
No. Because the tiles themselves have been hollowed, they are more likely to fall off when subjected to external vibrations. Now there is a grouting process on the market, which is specifically for tile hollowing.