What is the effect of a painter applying paint directly to new furniture that has been glued to the

Updated on furniture 2024-05-07
2 answers
  1. Anonymous users2024-01-23

    In principle, it can be cleaned with the thinner corresponding to the "paint".

    However, the specific situation is analyzed on a case-by-case basis, mainly depending on the properties of the substrate and base coating of your furniture, as well as the properties of the "paint" that fall on it, take appropriate methods to remove it.

    First of all, it is necessary to see whether the "paint" on the furniture is oil-based or water-based paint, if it is a water-based source paint for wall paint, it can be wiped directly with water or alcohol. If it is oil-based paint, it depends on the material of the furniture itself, if it is panel furniture, use the corresponding thinner of the paint dripping on it (alkyd diluent for alkyd paint, nitro thinner for nitro paint) dipped in a cotton cloth to wipe it, and clean off the thinner as soon as possible after wiping and cleaning (because the thinner has a certain corrosion of the finishing material of the panel furniture).

    If the furniture itself is also a paint surface and has the same properties as the dripping paint, the hail base is more troublesome (of course, if the paint that has just dried has not dried, first quickly dip the large pieces of paint and then quickly clean it with thinner) If the dripping paint has dried, because erasing with thinner may damage the paint surface of the furniture itself, it is more reliable to first use sandpaper to polish the dripping paint thinly, and then use a cotton cloth dipped in the thinner of the paint to quickly wipe it, Because grinding and wiping will cause the surface of the furniture to be dark and not bright, do not worry, after cleaning the grinding part, use toothpaste (or professional sanding paste) to apply to the part that has just been treated, and after repeated grinding posture, you will find that the part just treated is bright again, and then clean up the toothpaste, etc., and then the treated place is protected by a layer of light paint, and the furniture will be as bright as ever.

  2. Anonymous users2024-01-22

    When doing carpentry, it is true that a lot of dust will be left, the dust on the cabinet, it is recommended that the owner clean it first, keep the room clean, it is best to have a vacuum cleaner to suck it down, and then wipe it with a rag to brush it down, and the effect made by the master will be much better. The benefits are your own, just a little more time. If the master comes to clean it, it must be very clean.

Related questions
2 answers2024-05-07

Brush the primer first, use putty to scrape the holes and uneven places, and after drying, sand it with wood sandpaper, and then formally brush the topcoat.

6 answers2024-05-07

Need to look at the skills, paint the salary of the hand is basically 5000 up, a single type of work is a little less, now the furniture factory is generally piecework, but there is a guarantee, the general minimum salary is about 3500 yuan.

1 answers2024-05-07

The salary of latex paint is about 4500-5000, and the paint depends on the specific furniture, otherwise it can't be said

1 answers2024-05-07

Generally, there are base gases, color paints and topcoats, which are mainly used to seal the cell ducts of wood and block the passage with air; Pigments are mainly used to modify the exterior color of furniture, as well as to cover up the uneven color of the wood itself. The topcoat is mainly used to protect the furniture and make the furniture more durable, which is equivalent to a protective film.

4 answers2024-05-07

Content from user: Jaezi Text.

1 Main construction technology (1) varnish construction process: clean the surface of the wood, matte paper polishing, moisturizing powder, sandpaper sandpaper, full scraping of the first putty, sandpaper polishing, full scraping of the second putty, fine sandpaper polishing, painting oil color, brushing the first varnish, spelling the color, recovering the putty, fine sandpaper polishing, brushing the second varnish, fine sandpaper polishing, brushing the third varnish, polishing water sandpaper grinding fade, waxing, polishing. (2) Mixed color paint construction process: >>>More