What caulk to use for the gaps in the wall tiles of the bathroom and kitchen. Or a beautiful sewing

If the gap between the bathroom tiles is less than 1 mm, you can choose caulk, which will be easier to operate, if the gap is relatively large, you can consider using the caulk.

Both the sewing agent and the caulk have a good anti-mildew and waterproof effect, although it does not look much different, but the difference will gradually appear after a long period of use. Because the sewing agent is more resistant to dirt and waterproof than caulk, it is not easy to turn black and yellow when used.

Although the beauty sewing agent is a substitute for caulk, it is also an upgrade of caulk, which will be better in terms of performance and essential quality, so the price will be higher. If you fill an ordinary bathroom at the same time, the caulk may only cost a few dozen dollars, while the cost of the sewing agent may be several hundred dollars.

Quality issues that should be paid attention to

1. The horizontal and vertical seams are uneven: the horizontal and vertical seams are not properly connected with the horizontal seams, the hooks are not carefully and repeatedly, and the horizontal and vertical seams are not cleaned when the seams are swept.

2. The ash around the door and window frame is not strict: the door and window frame is not plugged as a process of strict requirements, the construction is not serious, and the ash is only taken care of the surface, and is not stuffed inside.

3. The depth of the seam is inconsistent: the gray seam is drawn in different shades, the operation is not serious, and the technology is not proficient.

4. There are narrow seams and blind seams: there is no careful inspection before hooking, and there is no open seam treatment for narrow seams and blind seams.

5. Seam leakage: waist line, lintel, first skin brick and door and window brick wall side often leak hook, the operator should repeatedly find the missing hook and make up the hook in time.

It is recommended that you use caulk first, wait for the caulk to dry (at least 48 hours after construction), and then use the beauty caulk to apply, this effect is the best! Of course, if you don't consider the cost, you can use the beauty sewing agent directly.

OLY

Introduction: It is used for the beautification and repair of tiles, mosaics, stones and other gaps and corners; Kitchen and bathroom, ceiling, wallpaper, doors and windows and other building materials for corner decoration. The beauty of the caulk is the upgrade of the caulk, the decorative practicability of the caulk is obviously better than the color caulk, kitchen, bathroom wall and floor tile joints will be yellow and black after a period of time, the imported caulk can not do anything to solve the problem, now there is a solution, is to use tile caulk.

Nowadays, the living room, kitchen and bathroom of the home usually encounter the problem that the tile gap turns from white to black, unhygienic and affects the appearance, and the brick joint becomes black, and even breeds bacteria, produces peculiar smell, which will harm human health, especially in summer. It is characterized by rich color, natural and delicate, glossy, non-fading, and strong decorative effect, which can be matched with tiles of different textures and different colors, and integrates the gorgeous brick joints and tiles into one, which can enhance the overall beauty of the wall and ground.

Construction method: 1: Install the sewing agent on the special nozzle. 2: Load the booster applicator. 3: Press the glue gun to knock off the gel about 30 cm in front to avoid uneven mixing. 4: Evenly and vigorously glue.

Precautions: 1: The remaining material of the colloidal after construction should be removed with a rag or shovel before it is completely cured within 24 hours.

2: If the construction process is interrupted for more than 20 minutes, the colloid begins to solidify, and the nozzle needs to be replaced.

3: Before construction, you need to make sure that the base surface is free of impurities, oil, water, dust, etc.

Hello, because the bathroom is an extremely humid place, the tiles will often come into contact with moisture, so the tile gaps are easy to dirt and mildew, and in serious cases, it may affect the health of the family. Therefore, it is necessary to sew the bathroom beautifully. It should be noted that the bathroom needs to keep the floor dry and clean before doing beauty sewing.

Because once the water vapor enters the beauty sewing product, it will affect the effect of the beauty sewing construction. When sewing in the bathroom, you can choose a series of products such as Diamond Epoxy sewing agent, which has good waterproof performance, and is environmentally friendly, mildew and antibacterial, tough and non-cracking, which is very suitable for caulking and sewing in the family, kitchen and bathroom environment. I hope my answer will be helpful to you.

The caulk has strong adhesion, small shrinkage, strong color fixation, anti-crack flexibility, good decorative texture, pressure resistance, wear resistance, and mildew resistance, so that it can perfectly repair the cracking or damage of the floor surface, and it can also be painted on the surface, with good waterproofness. Caulk is rich in color and can also be formulated by itself, so it is more and more popular with customers, and in order to achieve good results, it must be used with care.

Conventional construction of caulk:

Jinshi caulk can only be constructed after seven days of cement paving (tile adhesive can be constructed two days after paving), and the construction temperature should not be lower than 0 degrees.

First of all, the surface of the mosaic or the surface of the stone and the joints must be cleaned, so that the surface of the mosaic can be wet with a damp cloth, but do not leave standing water, so as to reduce the small holes on the mosaic to absorb pigment and cement, and ensure its coloring and final condensation.

To help control color and reduce powdering, wipe down surfaces with a cotton cloth or a clean, dry towel within 1-2 hours.

Care must be taken to prevent the caulk from drying out during the first 72 hours (especially for outdoor sun-exposed surfaces) and to cover the surface with natural kraft paper (preferably not with plastic sheeting or newspaper) to prevent other construction operations from soiling the newly made joints. Outdoor caulking can be moisturized with 2-3 sprays.

The beauty sewing agent is an upgraded product of the grout, and the decorative practicability of the beauty sewing agent is obviously better than that of the color caulk. The traditional caulk is applied to the surface of the caulk, but the new caulk does not need caulk to be the bottom layer, and can be directly added to the tile gap after the tile is bonded. It is suitable for gap filling of more than 2mm, and the construction is more convenient than the ordinary type, and it is an upgraded product of caulk.

If you deliberately leave a brick joint with a width of more than 2mm, and there is no cement left in the brick joint, then there is a basis for making beautiful seams, and you can consider doing beautiful seams. If the seam is not wide, and there are a lot of cement residues that are not clean, even if it is, it doesn't look much better to do beautiful seams, fill in some ordinary caulk, and save money.

It is recommended that if you use floor tiles to make a kitchen and bathroom on the wall, do not use corner lines!

I think tile grout, just listen to the name, everyone should know what this thing is, right? As a material that fills the gap between tiles and tiles, although it is only a few millimeters wide, it plays an important role in landscaping. So, what is the color choice of tile grout?

How to choose? First, the color selection skills of ceramic tile beauty joint. At present, the mainstream ceramic tile joints on the market include metallic series, bright series and matte color series.

1. Bright color grout: diamond gold, ivory white, enamel gold, etc., they are very bright and more suitable for public decoration style houses, such as glazed tiles, vitrified bricks can be the beauty sewing agent of this color.

2. Metallic sewing agent: noble gold, noble silver, etc., this color of American sewing agent has a strong metallic texture, and the color is also very full. It is helpful to improve the quality and texture of the tiles.

3. Matte color beauty grout: porcelain white, silver gray, ivory gold, etc. This colored cosmetic grout is more suitable for rustic bricks and matte tiles.

Second, how to buy a beautiful sewing agent.

1.Look at elasticityWhen buying tiles, elasticity is a very important parameter. In terms of performance, the better the elasticity of the sewing agent, the less likely it is to crack after a long period of use. When it comes to purchasing, the best elasticity is preferred.

2. Look at the price of beautiful sewing agent, there are high and low, and there are many influencing factors. Have good financial ability, of course, it is recommended to choose a well-known brand; If you're on a tight budget for renovation, you should also choose a modest brand; Cosmetics agents who are too expensive have a very high probability of quality problems.

3.Take a look at the quality patchwork. The density of the protective film is very large, which maintains the effect. So, when consumers are shopping, they can do a little experiment to see how the water is rubbed.

4.Look at the mold resistance. If the mold resistance is not good, the cracks are prone to mold during the rainy season. Mold is not well treated. This is especially important when making a purchase.

First use caulk to construct, after the caulk is dry (at least 48 hours after construction), and then use the caulk to build, this effect is the best, if you don't consider the cost, you can use the sewing agent directly.

Construction method: 1: Install the sewing agent on the special nozzle.

2: Load the booster applicator.

3: Press the glue gun to knock off the gel about 30 cm in front to avoid uneven mixing.

4: Evenly and vigorously glue.

Precautions: 1: The remaining material of the colloidal after construction should be removed with a rag or shovel before it is completely cured within 24 hours.

2: If the construction process is interrupted for more than 20 minutes, the colloid begins to solidify, and the nozzle needs to be replaced.

3: Before construction, you need to make sure that the base surface is free of impurities, oil, water, dust, etc.

Just ordinary caulk, there is no need to use the sewing agent, and the sewing agent is a kind of colored glue, which is difficult to wipe.