-
Check carefully to see if the repair was completed and the valve was not opened.
-
The valve under the toilet bowl is not open.
The bottom of the toilet is generally connected to the ground with glue, and cement is also used, but it is relatively rare. The toilet is relatively airtight, and even if the connection between the bottom of the right and the ground is not tightly sealed, it will generally not leak. Therefore, the problem of water seepage should be judged to be clean water, and the bottom of the toilet bowl is an S-shaped pipe, which will not leak without external impact. >>>More
This means that your toilet drain does not have a full match with the ground sewer, and you will need to reinstall the toilet bowl - if it does, there will be no water in the gap with the floor.
If it is a building, it is necessary to lay a waterproof layer on the bathroom floor during decoration, and then lay floor tiles on top of the waterproof layer, and finally install a toilet.
AB glue and glass glue are OK.
At that time, there was no connection, and the thorough solution was to carefully remove the toilet bowl and re-glue it with cement; Simple solution, hit silicone.