-
Anonymous users2024-01-23White cement, caulk, and transparent glass glue are also available.
-
Anonymous users2024-01-22What is the best way to fill the gap between the bathroom wall tiles and floor tiles, this is the one who sticks the wall tiles with you, they should be very professional...
-
Anonymous users2024-01-21Answer: The floor tile joints of the toilet are filled with white cement, putty powder, caulk, beauty sewing agent and other materials. Among them, white cement and putty powder belong to traditional materials, which will have defects in performance, and some are prone to fall off and leak out of the gaps after a period of use, so they can be used after simple treatment before using caulk materials.
In addition, the floor tile caulking should be carried out after 24 hours after the tiles are paved, which is easier to clean. The composition of the grout is white cement, trace polymers and pigments, and the surface strength is higher than that of white cement. However, the grout is not easy to contaminate the surface of the floor tile, and it is troublesome to clean.
The beauty sewing agent is rich in color and bright color, which is suitable for matching with various color tiles. The surface layer has high strength and good toughness, the surface is smooth, easy to clean, waterproof and moisture-proof, and will not pollute the tiles during construction, which is the most cost-effective. The color of white cement is single, divided into ordinary white cement and decorative white cement, the former has a slightly higher strength, whiteness of about 80%, and the latter has a lower strength, whiteness of about 84%.
The whiteness of white cement is low, the sticking strength is low, the chalking phenomenon is serious, the brick joints are easy to yellow and dirty, and it is a mold breeding ground in a humid environment.
-
Anonymous users2024-01-20It's all with caulk or metal strips! Combine your home decoration style to see who is better!
The circumference of the four walls of the bathroom or kitchen multiplied by the height is the area of the wall tiles of the bathroom or kitchen, and this area is divided by the area of each wall tile to be the number of tiles that should be bought. The length of the bathroom or kitchen multiplied by the width is the floor tile paving area of the bathroom or kitchen, and this area is divided by the area of each floor tile, which is the land that should be bought.
The porcelain piece is seamed, and it is not beautiful for a long time outside two months, and it is air-dried, and the bricks are easy to fall off and hollow!
There is no other way to chisel it off and re-paste it.
Because the bathroom floor has been waterproofed, the structure of the bathroom is not permeable, so the water in the mortar cannot quickly seep down when laying the floor tiles, and the amount of water absorbed by the bathroom tiles is naturally more, so the alkali is flooded. The floor tiles will not continue to be alkaline after drying.
This is unreliable!
Do not smash the floor tiles to judge the severity of the bathroom leakage, is a slight water leakage, the bathroom does not smash the tile with waterproof paint is reliable, after all, the waterproof material without smashing the brick can prevent the bathroom slight leakage, can also play a certain waterproof protection effect. >>>More