What to plug the gaps in the wall tiles of the bathroom that have been dry

After the tiles of the bathroom are pasted, the gaps between the tiles need to be grappled

The material of the hook seam:

1) The materials commonly used in grout are mainly cement, grout, putty powder, etc. Among these materials, putty powder and white cement are more traditional materials, and now they are used more as jointed materials, mainly balcony cultural bricks, such as paving balcony tiles, and ordinary cement mortar can also be used directly.

1) putty powder, white cement waterproof performance, scrub resistance is poor, now, in the process of home decoration, in the kitchen and bathroom wall floor, living room floor tile joints are generally not used, now basically choose professional tile caulk (also known as grout).

Types and selection of grouts:

1) grout is now mainly divided into sand and no sand on the market, generally speaking, paving bright wall tiles and vitrified tiles are suitable for sand-free, paving matte bricks and antique floor tiles are suitable for sand.

2) There are two ways to choose the color of the grout, one is the proximity method, which is close to the color of the tile, and the second is the contrast method, which forms a strong contrast with the color of the tile.

Selection of hook seam time:

Generally, the time of joint selection is 24 hours after tiling, that is, after the tile is dry, the joint time is too early, which will affect the tiles, resulting in unevenness or loosening and falling off. In addition, before hooking, it is necessary to clean up the dust and debris in the cracks of the tiles.

Use a special tool to remove the cement from the gaps in the tiles, then fill it with grout and wipe it clean.

Generally, grout, cement, ceramic glue or white cement are used.

1. It can be made with ordinary caulk, but ordinary caulk is synthesized with dry powder + water + a certain amount of glue, and the color will be different after being used in a humid environment for a long time, and it is easy to fall.

2. It can be made with a sewing agent, which is composed of a new polymer and high-grade pigment, which can be hardened after drying and is not easy to change color.

3. Porcelain grout can be used, but porcelain grout has a certain corrosiveness to ceramic tiles from the current use of my customers.

For the gaps of wall tiles that have been dried, the following methods are often used to plug the gaps, firstly, you can use ordinary caulk to do, but ordinary caulk is synthesized with dry powder + water + a certain amount of glue, and the color will be different after a long time in a humid environment, and it is easy to fall. Therefore, it is cumbersome and difficult to operate for self-repair, so it is not particularly recommended.

Secondly, it can be made with professional sewing agent, which is composed of new polymers and high-grade pigments, which can be hardened after drying, and is not easy to change color.

If there is only a small area of hook joints at home, you can do it yourself, if the whole house needs to be hooked, then the amount of work is relatively large, you can ask the outside master to hook the joints, you will save a lot of trouble.

Caulk, a good point for cow dollars.

It is recommended to use real porcelain glue, which is waterproof.

What to fill the gaps in the bathroom tiles can be waterproof, and the joint material must be selected to ensure that the bathroom does not leak.