How to distinguish the quality of solid wood furniture?

In fact, which kind of wood is good for solid wood furniture, is only one aspect, and the value of solid wood furniture not only depends on the wood it uses, but also should pay attention to these aspects

First, the manufacturer's processing equipment and process capacity: generally large manufacturers for wood processing is in place, small workshops will be poor in terms of factory quality assurance, even if the wood used in small factories is all real materials, but because of equipment and process problems, or in the future may occur a variety of problems.

The second is workmanship: not only the outside is very exquisite, the internal feel, the workmanship and neatness also reflect the quality of the furniture.

The third is auxiliary materials: the quality of binders (glue) and paint is also the key to environmental protection, and the more simple and environmentally friendly, the better.

Fourth, hardware: hinges, slides, handles, etc., the quality of the furniture is also greatly affected.

3. Solid wood furniture wood identification skills.

So when buying solid wood furniture, how should you buy, how to prevent bad merchants from being fake? Identification skills when solid wood is beginning to take shape?

When purchasing solid wood furniture, you should first pay attention to whether there is a clear wood grain on the furniture panel, if so, and then look at the back of the position, whether there is the same pattern, if there is also a pure solid wood. Another way is to look at knots, where there is a scar on the board, if there is the same scar on both sides of the board, it can be confirmed that it is solid wood furniture.

Buying solid wood furniture is more time-saving and space-saving, and will not cause unnecessary troubles for what furniture to buy, such as the owner's customization, etc., when purchasing, you should also pay attention to check whether the wood of the planks and drawers is dry and white, whether the texture is tight and delicate, and whether there is a pungent smell; Whether the surface of the board is finely processed, whether the panel is smooth, whether there are burrs, whether there are cracks or bubbles in the pigment brush. The bad solid wood furniture wood, mostly the kind of chestnut skin red, will look a little old-fashioned in color and style.

The quality of solid wood furniture, wood is only one of the reasons, in addition, you also need to pay attention to several other aspects, the last time I went to the Louvre to buy a set of solid wood sofa, the clerk told me that you also need to judge the quality of this set of solid wood furniture through these aspects.

1: The manufacturer's processing equipment and process capacity: large manufacturers treat wood in place, and the quality assurance of small workshops will be poor, because of the problems in the equipment process, and various problems may occur in the future.

2: Workmanship: not only the outside is very beautiful, the inside feel, the workmanship and neatness also reflect the quality of the furniture.

3: Accessories: The quality of binder (glue) and paint is also the key to environmental protection, and the more simple and environmentally friendly, the better.

4: Hardware: The quality of slide rails, handles, etc., also affects the quality of furniture to a large extent.

Solid wood furniture, due to the different types of trees used, is also very different in terms of variety and quality.

For example, if the material of solid wood furniture is a cherry tree, the color of this wood is lighter, it belongs to yellow-brown, the pattern in the middle is smaller, and the cherry tree and black walnut are high-grade materials for solid wood furniture, but the cherry tree material is generally often used as a skin, and is rarely used as the core material part of the furniture.

Solid wood furniture is not a traditional material is made of solid wood, and all parts or main materials of furniture are made of solid wood to be called solid wood furniture. There are many on the market, and merchants will use similar wood is a mixed material as solid wood furniture, and this kind of counterfeit furniture cannot be selected as solid wood furniture at all.

Because natural wood will inevitably have some color difference or scar texture when it is formed, therefore, if the color of a solid wood furniture is too perfect, or there are almost no natural flaws, this kind of solid wood furniture is not necessarily solid wood furniture in the real sense.

Natural solid wood furniture, wood will exude a natural wood fragrance, if a solid wood furniture in the approach, smell a pungent smell or have a clear smell of glue, it means that this is not a good solid wood furniture.

Good solid wood furniture is not only beautifully designed, but also very well-made, especially in the interface or corner, it will not feel very rough to the touch, and it feels very good.

At the same time, the interface of solid wood furniture will also be quite firm, if a solid wood furniture meets the solid structure, and the front column is close to the load-bearing bar and other conditions can also indicate that this is a good solid wood furniture.

Ask carefully if the furniture is "all solid wood" and where MDF is used. Ordinary solid wood furniture is usually made of beech, etc., while precious mahogany furniture is mainly made of rosewood, wenge wood, and rosewood. The market for solid wood furniture is more chaotic, often shoddy, confusing tree species, it is best to buy brand-name products, and at the same time pay attention to the fact that the price of wood is rising day by day, too cheap is absolutely fraudulent.

Look at the unpainted part of the back. If you have a drawer, pull it out and look at it. The pattern of the solid wood is very clear, and there is no pungent smell on the smell.

Synthetic boards have a great smell of chemical ingredients! Finally, the merchant should issue an invoice indicating that the furniture is made of solid wood! Just in case!

It's good to leave room for it.

Look at the scar first. There is a natural color difference in all solid wood furniture, and there are certain differences in color and texture, and there are few defects in the appearance of solid wood veneer furniture, and its texture is clear and even better than that of all solid wood furniture. Consumers can use the texture and scar knots of solid wood to see the corresponding position on the exterior and back respectively, and if the correspondence is good, it is pure solid wood.

In addition, looking at the scar is also a good way to identify pure wood, look at the location of one side of the scar, and then find out if there is a corresponding texture on the other side.

Introduction: In view of the mixed phenomenon in the solid wood furniture market, how should consumers buy solid wood furniture? Relevant experts have listed four key steps for consumers - "one look, two questions, three knocks and four smells", so that experts can teach you how to distinguish the quality of solid wood furniture.

Look at the scar first. There is a natural color difference in all solid wood furniture, and there are certain differences in color and texture, and there are few defects in the appearance of solid wood veneer furniture, and its texture is clear and even better than that of all solid wood furniture. Consumers can use the texture and scars of solid wood to look at the exterior and back correspondingly.

The location, if well corresponded, is solid wood. In addition, looking at the scar is also a good way to identify pure wood, look at the location of one side of the scar, and then find out whether there is a corresponding texture on the other side.

Secondly, ask carefully whether the furniture is "all solid wood" and where MDF is used. Ordinary solid wood furniture is usually made of beech, white oak, ash, elm, catalpa, rubber wood, and oak, while precious mahogany furniture is mainly made of rosewood, wenge, and rosewood. The market for solid wood furniture is more chaotic, often shoddy, confusing tree species, it is best to buy brand-name products, and at the same time pay attention to the fact that the price of wood is rising day by day, too cheap is absolutely fraudulent.

Then, with a few taps on the wood surface, the solid wood parts make a crisper sound, while the wood-based panels have a deeper sound.

Last but not least, smell the furniture. Most solid woods have the aroma of tree species, pine has a pine resin smell, cypress has a light fragrance, and camphor wood has a clear camphor wood smell. However, fiberboard and MDF will have a strong pungent odor, especially in cabinet doors or drawers, and the two are easier to distinguish.

Solid wood furniture refers to pure solid wood furniture, which is processed from natural wood, using a small amount of glue in the production process, and does not contain any polluting substances. And the solid wood furniture is beautiful, noble and classy, and has a strong ornamental value, especially suitable for families in Chinese style. However, now the price of solid wood furniture is expensive, many furniture market will be mixed, in order to avoid consumers to buy good quality solid wood furniture, how to distinguish the quality of solid wood furniture?

Users in need may wish to take a look.

1.To identify the quality of solid wood furniture, first look at whether the wood on the surface of the furniture is good, if it is a furniture made of good quality wood, the surface will be smooth and smooth, and shiny. Whether you open the cabinet door or drawer door of a good quality solid wood furniture, you can see the clear texture of the wood, and you can also smell the faint fragrance of the wood, rather than the pungent musty smell or paint smell.

2.Secondly, look at whether there is wood grain and knots on the surface of the furniture, such as a cabinet door, which looks like a pattern on the outside, then corresponds to the position of the pattern change, and looks at the corresponding pattern on the back of the cabinet door, if it corresponds well, it is a pure solid wood cabinet door. The identification method of looking at the nodal scar is similar.

3.Carefully find its defects, especially in the main stressed parts of the furniture, such as the columns of the furniture and the load-bearing horizontal strips close to the ground between the connecting columns, there can be no large knots or cracks, and the structure must be firm to prevent the furniture from loosening.

4.The last point is to touch the surface of the furniture, touch the surface of the furniture with your hands, and carefully see if the furniture is smooth, especially whether the parts such as the table legs are rough, whether the paint has streaks, cracks or bubbles. Generally speaking, good quality solid wood furniture will not have such a problem, and good furniture can be seen at a glance, and there will be no cracks.

There are many ways to identify solid wood furniture, and after mastering these methods, you will have experience when buying solid wood furniture. The same solid wood furniture should be well maintained during use, the most important point is to prevent furniture deformation and cracking, because solid wood furniture has low moisture content, so there can be no direct sunlight, and the indoor temperature can not be too high, so the indoor temperature and humidity are best kept within a certain range.