-
Water splashes on it help lubricate alas.
-
Make a pre-installation yourself and then apply for a patent.
-
The drain is moved to the front, and there is no water in the back, so the poop can't be dissolved when it reaches the water, and then the poop sticks to the PP.
-
You use very hot water to flush it, and it works.
-
Fill the toilet with water and leave it for a while.
-
Fill the toilet bowl with water, and then use a sturdy clinker bag to cover the toilet bowl and artificially pressurize it, which works well.
Water in the return bend. The water in the return bend is meant to stop the smell from the sewer from coming up.
Clause.
1. Preparation for the installation of the flush toilet Before installing a flush toilet, the following 5 preparations should be made: first, check the level of the ground where the toilet is installed; The second point is to check the sewage pipe of the toilet bowl and remove the debris in the sewage pipe; The third is to leave a distance of 2 to 3 mm above the ground at the sewer outlet; The fourth point is to check whether there is any leakage in the water pipe and debug and install the water tank accessories. Finally, it is necessary to test the sewage effect of the toilet, if the water is flushed very quickly, it means that the drainage is not smooth and there is a blockage. >>>More
The bidet toilet comes with an S-bend. So there is a water level, one is anti-odor, the other is anti-stick, squat toilet S bend. The P-bend is mounted on the tube. Its water level is below 50 centimeters, and the purpose is also to prevent odors.
There is a water supply system inside the toilet, when the amount of water is insufficient, the valve will open to let the water in, and when the amount of water reaches a certain level, the valve will be closed by the buoyancy of the water, so that the water supply can be stopped. >>>More
The pressure is the same, and it is only necessary to ensure that the original water level is the same. It is recommended to put 5 liters of stuff in the water tank, for example, put 10 500ml drink bottles filled with water, depending on the shape of your water tank. Absolutely popular, absolutely simple, solves the problem.