-
Anonymous users2024-01-24If there are only a few pieces of hollow bulge, then directly remove and then buy tiles of the same color of the same brand, and use tile adhesive to pave it, the following is the standard construction method:
1. Pour the porcelain sticker powder into clean water and stir it into a paste (mixing ratio: 20kg powder 6kg water), after stirring, it needs to stand still for about 10 minutes, and then stir slightly before use, which helps to increase the adhesion force.
2. Use a toothed scraper to apply the glue on the working surface to make it evenly distributed and form a toothed shape.
3. Knead the tiles on the top during the drying time.
-
Anonymous users2024-01-23Wouldn't it be okay to get some cement and a few tiles yourself.
-
Anonymous users2024-01-22If you are troublesome, you can buy it online, and now the tiles can be purchased online. Or search the Internet to see if there is a tile store nearby that sells it.
There are many reasons for the protrusion of floor tiles, materials, processes, temperatures, etc. Or the cement used in laying is inferior cement, so that the ground base layer fails to produce strong viscosity to the brick, so that the brick warps in the process of thermal expansion and cold contraction. There is also that the floor tiles are paved side by side, the size of the gap is not properly handled (generally 2mm), and the expansion and contraction of the base layer is larger than that of the tile, which will cause the arch of the tile layer, and the warping of your balcony is likely to be due to the thermal expansion and contraction produced in winter. The treatment method is to pry up the warped floor tiles, remove the ground base, and then use high-quality 325 cement and yellow sand to lay the bricks.
It may be that there is not enough material when applying the tiles, or it may be caused by the tiles being blistered and the cement underneath sagging.
Remove it, clean the bottom, brush it well, use mortar and put it back on.
Lift the side seams of the upturned tiles with a blade, and pour the cement into a thin soup, and pour water before pouring it. Press down with a weight after filling. It is easy to pull after two days of solidification.
The position of the flue is more difficult to deal with, because the flue wall is thin, shrinks quickly, and is easy to warp! It is best to paint a layer of mortar on the flue after patting the grout, and then paste the brick, so that it will not warp! Hope it works for you! Hope to adopt.