-
The pressure is the same, and it is only necessary to ensure that the original water level is the same. It is recommended to put 5 liters of stuff in the water tank, for example, put 10 500ml drink bottles filled with water, depending on the shape of your water tank. Absolutely popular, absolutely simple, solves the problem.
-
The pressure is determined by the vertical height of the toilet and the water tank, since the height is the same, so the pressure is also the same, you just reduce the amount of water according to the upstairs practice, so to achieve the purpose of saving water.
-
Find a few Coke bottles. Fill the tank with water.
-
Find a few mineral water bottles, fill them with water, and sink them into the toilet tank, which is a good way to save water without affecting the flushing effect.
-
Just throw a few bricks in the tank.
-
AN change to a water-saving new.
1. The reason for not storing water is that the elbow is designed to be far behind, so you can't see the water from the front. Flush type is the majority. >>>More
The water output is controlled by the middle one, you can use the big key to try the water output first, and then try the small key, if the installation is reversed at that time you just turn the button on the lid off the head, please adopt it.
It may be that there is a build-up in the sewer that is causing the blockage. >>>More
The reason for the air hammer is that some places below you may be blocked, but the blockage is not bad.
Water in the return bend. The water in the return bend is meant to stop the smell from the sewer from coming up.