-
Anonymous users2024-01-23Water in the return bend. The water in the return bend is meant to stop the smell from the sewer from coming up.
-
Anonymous users2024-01-22The flushing pipe is a large N type plus a small U shape, using the principle of water level and water pressure to form a "water seal", and the water cover can make the toilet bowl have a "stopper" formed by a section of clean water, preventing the dirty smell in the pipe from entering the room through the toilet pipe (otherwise the smell is ......).）
The water output is controlled by the middle one, you can use the big key to try the water output first, and then try the small key, if the installation is reversed at that time you just turn the button on the lid off the head, please adopt it.
It may be that there is a build-up in the sewer that is causing the blockage. >>>More
I believe everyone has encountered a blocked toilet, and it can also be said to be a more common thing in lifeNot only does it directly affect normal life, but it puts us in an awkward position? In fact, after the toilet is blocked, you may not immediately turn to a professional toilet company, you can try it yourself, so what are the methods of flushing the toilet? >>>More
The principle of the flush toilet is mainly the siphon principle, and the schematic diagram of the flush toilet is also based on the siphon principle. The "pumping" of the flush toilet refers to the S-shaped bend under the toilet, and when the water surface in the toilet exceeds the high point of the S-bend, the siphon phenomenon is formed, which can pump the water and dirt of the toilet together. Until only a small amount of water remains, the siphon destroys, leaving a small amount of water, forming a water seal. >>>More
How do you unclog a flush toilet? Toilet blockage is generally a blockage at the toilet trap, and the best and easiest way is... >>>More