Can I use the toilet directly after the bathroom is waterproofed and the toilet is installed?

After the bathroom is waterproofed, the toilet is installed, and it can be used directly.

Go to the hardware and grocery store to buy a set of sealing gaskets for the toilet and a glass glue, go home and turn off the water inlet valve first, then press the toilet flush button to drain the water in the water tank, and then remove the toilet, then clean the junction between the toilet and the ground, first glue the sealing ring, and then apply a circle of glass glue according to the outer diameter of the toilet, and then install the toilet back to its original position.

If you don't have the ability to do it yourself, it's best to find a professional to do it.

Yes, you can. However, if the waterproof layer is a waterproof coating, long-term use will damage the waterproof layer.

No, after a long time, the waterproof will be damaged, and the waterproof effect will be lost, and a protective layer should be made, such as cement or tiles.

It should be possible, the bathroom already has waterproof measures, such as waterproof concrete or something.

If there is a leak, the downstairs will suffer, they will ask you for compensation, and in case of leakage, you use the toilet, there is poop and other water flowing out, and the maintenance personnel are not willing to get it for you.

If the waterproof is done, you can use it! What can be the problem, the rest is just aesthetics!

1. Recognize famous brands when purchasing: At present, the market is flooded with crooked goods, and a large number of toxic materials that have been eliminated and banned by the state have also poured into people's homes. Ordinary consumers should choose brand products with high visibility, good reputation, high degree of anti-counterfeiting, and international quality system certification.

2. The waterproof part should be comprehensive: the floor and wall of the bathroom (the height of the return is not less than meters or full of work), the floor and wall of the kitchen and balcony (the height of the return is not less than the meter), all the ground and wall of the first-floor residence (the height of the meter), the ground and all the walls of the basement should be waterproof and moisture-proof.

Third, the thickness of the waterproof layer should be sufficient: the thickness of the waterproof layer directly affects its waterproof life, if the thickness of the waterproof layer is reduced, it is equivalent to reducing its waterproof life.

Fourth, the construction process should be meticulous: the joints between the wall and the ground, the yin and yang corners, the water pipes, floor drains and the periphery of sanitary ware and the trench where the hot and cold pipes are laid are the key waterproof parts, and the construction must be meticulous.

5. Closed water test after completion: After the waterproof construction is completed, seal the door and sewer, store water indoors for 24 hours, and check whether there is a leakage point.

It is usable if waterproofing is not a problem.

For the harmony of you and others! You have to do waterproofing again, so as to avoid future troubles, such as waiting until the floor tiles are installed and there is a leakage, it will be difficult to do. You say that?

Also install a floor drain, there is a slope on it.