-
Anonymous users2024-01-23The bathroom sinks without a foot and the sanitary threshold is one foot lower, waterproof must be dry at least full brush twice, waterproof and dry after the water is checked in the bathroom for 48 hours and 72 hours, the sewage pipe is not - a pipe, he will not be full of brush (1 meter 2 to 1,5 meters) to buy a commercial house, don't be afraid not to close the trouble waterproof can not directly paste tiles, Wei Xianjian I said that I have to brush twice, on the sand dry can be tiled. Waterproof must be fully brushed, do not stick tiles on the anti-top.
-
Anonymous users2024-01-22To wait for the waterproof to dry before tiling, it is best to store water to check whether there is leakage before soaking for two or three days before tiling.
Depending on the type of waterproofing material you use, the standard is that the waterproofing layer is dry.
In different places, different materials should be selected, and it is recommended to choose the comabic sensitivity of the membrane for the ground, and the rigid one for the wall. >>>More
1. Bathroom waterproof construction steps.
Step 1: You can use slightly coarser cement as a primer first, and wait for the cement to dry before brushing the waterproof coating. But in painting money, the ground should be flat and there should be no grooves. Water is then sprinkled on the ground to expel the gas from the small holes. >>>More
Five major brands of bathroom waterproof materials are for reference and selection. >>>More
After the bathroom is changed to water and electricity and floor drain, it should be waterproof, not only the ground, but also the wall from the ground around it should be 200mm high, and the wall in the shower should be 1500mm high, and the floor tiles can be paved after waterproofing.