-
Anonymous users2024-01-24The toilet tank is not yet a pressure vessel, as long as there are not too many debris, it can still be repaired. I used to glue the toilet tank lid with AB glue and it is still in good use.
I haven't used your silk glue yet, I don't know if it can be used for enamel bonding, if it can be used, as long as you pay attention to the cleaning, drying and maintenance of its bonding, as well as the future use of attention, I think it is still a very interesting thing.
-
Anonymous users2024-01-23The landlord can only change it The water tank is broken, how can it leak, and the ceramic is not so sticky.
-
Anonymous users2024-01-22Marble glue can be glued, that is, marble glue,
I just changed a set of toilet tank accessories a few days ago, plastic, a full set of ten yuan down. The old ones are not well sealed because of the rust of the iron parts, and they always run water. After the accessories are bought, you can change them yourself, it is very simple, the water storage can be adjusted by adjusting the height of the water stop float, pay attention to not to get the water drift stuck in the water tank during installation, otherwise the water will flood the gold mountain.
A family may be engaged in decoration once in a lifetime, before the decoration is generally rarely in contact with the bathroom market, when choosing a toilet, it is generally limited to looking at the brand first, and then choosing the style, and then asking the price. It didn't take long for the toilet to be used to go home, and there were problems such as water leakage and blockage. Leaking toilet is often a very annoying thing, how to solve this situation? >>>More
It's going to be changed together. Lift up the cushion and cover, the position of the bolt is just below the contact between the cushion and the pit, and you can touch it with your hand, and there is a plastic bolt on one side, which is very easy to replace.
First of all, to see how it is broken. If the toilet seat is damaged, it will basically be replaced, if it is only a shaking problem, it can be reinforced with cement (white cement); If there is a problem with the internal parts of the water tank, you can check where the problem is, open the water tank cover to check that it is not complicated, floats, water-stopping rubber pads, water replenishment pipes, etc., most of them can be bought online; The tap water valve can be visually inspected, and if the problem of dripping and breaking is found, it can be replaced. Of course, if it is difficult to do it yourself, it is most straightforward to find a professional repair!
You're talking about the flush pressure one, right? The requirements are not high, find a spring with a similar thickness of the silk and put it in.