What should I do if the toilet tank is leaking?

A family may be engaged in decoration once in a lifetime, before the decoration is generally rarely in contact with the bathroom market, when choosing a toilet, it is generally limited to looking at the brand first, and then choosing the style, and then asking the price. It didn't take long for the toilet to be used to go home, and there were problems such as water leakage and blockage. Leaking toilet is often a very annoying thing, how to solve this situation?

What should I do if the bottom of the toilet is leaking? This series of questions may be confusing for friends who don't know, so follow along to find out!

What to do if the flush toilet is leaking

The common cause of toilet leakage is that the hemispherical rubber cover that seals the drain is lighter, and the water leaks after the water tank is leaked due to insufficient gravity and not tight enough when it falls, and it often needs to be repeated repeatedly to close the lid tightly. The solution is to bundle a small amount of heavy objects on the connecting rod connecting the rubber cover, such as large nuts, toothpaste skins, etc., and pay attention to the bundle as close as possible to the rubber cover, so that the rubber cover is easier to cover the drain, and the water leakage problem will be dealt with.

Families with conditions should switch to water-saving sanitary appliances It is proposed to use water-saving water appliances or sanitary ware, adopt ceramic chip sealed faucets, eliminate spiral lifting iron faucets, transform toilet tanks of more than 9 liters, and use toilet water tanks of no more than 6 liters. For existing non-water-saving toilets, try placing a brick or a salt water bottle in the tank to reduce the amount of flushing water.

How to fix a leak at the bottom of the toilet

The bottom of the toilet is leaking, which may be due to the fact that the connecting sealing flange between the toilet outlet and the ground drain is not in place. At this point, you need to disassemble the toilet, buy a new flange and install it from scratch, and then fix the toilet with glass glue. The glass glue only plays the role of fixing the toilet bowl on the ground without moving the position, and does not play the role of draining water when the toilet drains.

If the main sewer pipe is drained smoothly, the flange will not leak to the outside if it is slightly misaligned.

1. First of all, open the water tank of the toilet bowl and see what level the scoop inside the water tank is at when it is full. If the water inside is full and the tank is still flooding, then there must be a leak coming out.

2. Use water to pull the card position of the water scoop up and down to see the sensitivity of the water scoop, if it is not smooth, or it is difficult to move, then it is announced that the water scoop equipment has failed. Remember to press the ladle down a little bit, not too high.

3. You can remove the equipment of the water scoop and clean it, if you don't know how to disassemble it, just put dry water in the water tank directly, and try it with dish soap and washing powder. If you can do this, you can continue to use it, if not, you need to replace it.

4. Check the interface of the stainless steel hose at the position of the water tank outside the water tank to see if it is not tightened or the rubber pad inside is aging and causing water leakage. This must be ascertained.

5. If the internal equipment is fine, then it is also necessary to check whether the water tank of the toilet has the problem of cracking caused by impact, and if there is an external force, the water tank may also have the problem of water leakage.

6. If you are a girl, or you don't know much about these problems, it is very simple, find the management office or find a water and electricity master, you can deal with this little trouble. If you want to buy a new toilet, it is also possible to ask the master who bought it to help install it.

You first see if the water level is too high, the water flows into the toilet from the top pipe, and if the water level is high, turn it down a little. Didn't you just buy a set of more than ten yuan to change. Wasting water is also wasting your money.

This is also the case in my house, if you use a thin rope, it is not easy to control the lid inside, so sometimes it will leak, which is very water-consuming, hehe. At first, I always closed the main water valve, but it was more troublesome, so I changed the flushing device in the toilet tank. So I suggest you change the set.

Then change the cork, or change it.