What s wrong with the toilet flush button not being pressed?

Summary. Please wait patiently for a few minutes, we are sorting it out, and we will answer you immediately, and please do not end the consultation.

What's wrong with the toilet flush button not being pressed?

Please wait patiently for a few minutes, we are sorting it out, and we will answer you immediately, and please do not end the consultation.

Hello dear, first of all, we must determine the cause of the button damage, whether there is a foreign object between the card sleeve and the button, which causes the button to jam or the snap ring to be damaged. Remove the water tank cover, check whether there is a foreign object in the gap between the sleeve and the button, take out the foreign body, if no foreign object is found, press the button with your fingers, whether there is a slight rebound force, it may be that the spring is damaged, and you need to replace the new spring.

I hope mine can help you, if you are satisfied with my service, please give a thumbs up, I wish you all the best!

Everyone has used the toilet, have you noticed the two buttons of different sizes on the toilet! Many people may think that the big button represents a lot of water output; The small one is the small amount of water output. After listening to the words of the decorator, I knew the purpose of these two flush buttons on the toilet.

Let's start with the structure of the tank

In general, the toilet is composed of a complete drainage structure consisting of an inlet pipe, a drainage pipe, a seepage pipe, and a flush button, and the flushing is done in this way.

Every time you use the toilet, you press the flush button, and through these different buttons, the toilet completes a flushing process. After the toilet is flushed, the water level in the tank will rise, and the next step is to complete the drainage.

So what do the two buttons on the toilet do?

The buttons on the toilet bowl are one large and one small, and the small button represents the state of semi-water; The large button represents a full water state. When the small button is pressed, the water in the tank will not be completely discharged, and only about half of the water will be discharged. When the large button is pressed, the water in the tank will be completely discharged.

There is also a situation where these two buttons are pressed together, so that not only the water is drained, but the main thing is that the impulse is increased.

The toilet is designed in this way to save water and can be decided according to your own requirements. Therefore, when you use the toilet, you can press a small button, a large button, or a simultaneous button. In our daily life, we still advocate everyone to save water, develop a good habit, and also save water resources.

There is also an easy way to save water, put stones inside the tank of the toilet, so that when draining, the amount of water will be reduced.

It should be stuck, you open the tank and take a look. Open the toilet tank and see if the linkage flush valve connecting rod is stuck, adjust the lower position and let the button be pressed.

In general, there are two possible reasons:

1. The toilet flooding bay is clogged with foreign objects.

2. The toilet drain elbow is blocked.

You find a professional dredging worker, dredge it for you with dredging machinery, and let him do it for you.

The flush toilet consists of the following main parts: inlet pipe, outlet pipe, seepage pipe, water plug (inlet and outlet), float, drain knob and lever, water refill mechanism, water tank, urinal (the urinal has a bend that connects to the water tank).

The basic principle of the flush toilet is to use the gravity of the water to convert the potential energy of the water into the kinetic energy of the water, so as to carry the excrement into the sewer pipe.

Water quality may cause the failure of the water parts, you can take off the water valve, clean it with clean water, and then press it repeatedly, and install it after recovery, but do not move the small scale next to him, otherwise it will affect the function and water volume of the toilet. If you still can't, contact after-sales. Generally, this thing can be guaranteed for three years.

There is a large diameter of silicone or rubber gasket at the bottom of the toilet drain valve, and after a long time, there will be viscous conversion impurities in the seal, which will hinder the separation of the rubber pad and the base to varying degrees, so that the force becomes greater when pressing the drain button, and even the situation that it cannot be pressed. The simplest way to deal with it is to open the upper lid of the toilet, add a small amount of detergent to the water tank, stay for a period of time and drain the water, or rotate the drain valve counterclockwise to a certain position, take out the upper part of the drain valve, and clean the bottom valve port of the rubber pad, hoping to help.

Open the water tank, twist the drain and turn it.

It's OK to change it, and it's not expensive.