Toto toilet flushes poorly, and flushes quickly with a large bucket to save water, why?

Updated on Toilet 2024-07-25
3 answers
  1. Anonymous users2024-01-24

    If the water in the tank is not enough, turn the water supply higher.

  2. Anonymous users2024-01-23

    The TOTO water-saving toilet installed in my house is quite water-saving, and the toilet flushes quickly, and it is flushed in three seconds. But the punch is not very good, and the toilet drain is also small. The stool is usually flushed twice.

    Toilet paper should not be flushed with the stool, otherwise it will clog. The flushing ability is not good, so it is not recommended to buy it. If you buy it, you must have a leather picker, as the toilet is easily clogged.

  3. Anonymous users2024-01-22

    Which model, does the water level in the toilet raise after the TOTO wrench is pulled?

    If the amount of water increases, it seems impossible to flush poorly.

Related questions
The toilet flushes poorly
5 answers2024-07-25

It is possible that there is a foreign object in the drainage pipe, blocked, first use a tool to dredge it from the floor drain, and in the experiment of whether the toilet drains smoothly, it is best to find the property department to check and dredge

The toilet flushes poorly, how to unclog it
14 answers2024-07-25

First of all, it is necessary to find the cause of the poor flushing, and then prescribe the right treatment. If the water level of the inlet valve is too low, you can disassemble the inlet valve, then take out the buckle of the water valve, rotate the water valve body in the counterclockwise direction, then adjust the height of the body, and finally tighten the water valve body clockwise, and buckle it. >>>More

Toto water-saving toilet press water how not to go down
2 answers2024-07-25

It should be the problem of your sewage pipe, which may not be suitable for small amounts of water, so find a better water supply and drainage engineer to help you take a look.

What should I do if the toilet flushes poorly?
6 answers2024-07-25

First of all, it is necessary to find the cause of the poor flushing, and then prescribe the right treatment. If the water level of the inlet valve is too low, you can disassemble the inlet valve, then take out the buckle of the water valve, rotate the water valve body in the counterclockwise direction, then adjust the height of the body, and finally tighten the water valve body clockwise, and buckle it. >>>More

The toto self-flushing toilet is out of order
2 answers2024-07-25

Find the merchant's after-sales service staff.