The light on the ceiling of the bathroom is broken, and I want to change the lamp tube how to remove

How about the replacement steps of the bathroom ceiling lamp Before changing the lamp, you should first disconnect the power supply, this is a very important safety protection, you don't think that just changing a lamp, there will not be much problem, but often the problem appears in this idea. Then, after turning off the power, we need to check what the problem is, whether it is a broken bulb or a bad wiring contact of our lamp. After checking the problem, it is the last step If the bulb is broken, then you need to remove the lampshade and replace it with a new one.

Or you can buy a special suction cup on the market, let it be used to suck the cutting board next to it, and the four corners need to be done once, so that it can be taken off very directly, and the price of this suction cup is also quite cheap. Because the specifications of the ceiling lamp are more suitable, so don't use a screwdriver or something to pry it off, because in this way it is easy to distort the original shape, and the most afraid is that it can't be installed back, so try to use professional tools to change the lamp. If you can't do it yourself, you must ask a professional to change it.

The lampshade should be pulled straight down, note that the lampshade inside does not include the outer ring.

Insert the blade 1 cm from the angle and pry off the lampshade.

Note: Move gently, do not damage the surface of the gusset and drop and damage the glass. Corresponding lamp model with lamp.

If it is an integrated ceiling, it is necessary to use a blade to slowly get up from where it is. It's a little hard to get, you can find a good board next to the side where to put two boards, and then get off the light. It would be better that way.

Remove a gusset first, and then cut off the lampshade by hand. It is better to have suction cups. It's so simple. It was all buttoned up piece by piece.