The lamp in the middle of the ceiling is broken, and if you want to replace the lamp, how to remove

Updated on Suspended ceilings 2024-02-11
2 answers
  1. Anonymous users2024-01-23

    Suction cups are used to remove the buckle plate, and do not use a blade to pry. Any kind of suction cup can be, hook suction cup, mobile phone suction cup, take turns to suck from the four corners of the gusset, don't suck from the middle, it will be troublesome to deform the gusset.

  2. Anonymous users2024-01-22

    Method 1: 1. Insert a saw blade or blade (preferably a saw blade) into the seam of the board, pull it down near the corner of one side, and pull it out from the corner of the gusset.

    2. In the above way, pull out the other corner of the same side, you can reach in and press out the other two corners, and the gusset is out as a whole.

    3. Reach out and press out the plate of the lamp, replace the lamp tube, and press it up into the card slot of the keel at one time.

    Method 2: 1. Or which lamp can be pushed up, which is very easy to change.

    2. There is a special suction cup, which is used to suck the cutting plate next to it and suck it from the four corners. It's easy to wait until you get a piece.

    Method 3: The principle of installing the aluminum gusset is to use the triangular keel to clamp the gusset, you use the blade to insert it from the seam of the side gusset, and use some force to take a piece of the gusset down under the gentle stay.

Related questions
How to change the ceiling lamp in the bathroom? The photo of the lamp is below
2 answers2024-02-11

Just take two pieces off the ceiling and you're good to go.

Seek help! The light tube in the kitchen ceiling is broken, how to replace it? There are pictures, u
5 answers2024-02-11

First cut off the power supply, use the suction cup (the kind of hook on the tile, made of rubber) to suck the electrical panel, and take off the electrical panel (the suction position should be cautious and the action should be light). Then pull the lamp buckle away, unplug the lamp, replace the lamp, buckle the button, and cover the panel. Replace the lamp with the original ballast. >>>More

How to replace the ceiling lamp is not a problem for the lamp
1 answers2024-02-11

If the ballast is broken, just buy a corresponding ballast and replace it.

How to replace the LED light with integrated ceiling if it is broken
1 answers2024-02-11

Most of the time the drive is broken, turn off the power, buckle it down, just change the drive, and the two wires don't need to be connected directly to the neutral line.

The lamp with the integrated ceiling in the kitchen is broken, how to replace it (see picture).
14 answers2024-02-11

1. Before changing the lamp, you should disconnect the power supply, this is a very important safety protection, you don't think that just changing a lamp, there will not be much problem, but often the problem appears in this idea. >>>More