-
Anonymous users2024-01-24It is not recommended, because the floor leather is a plastic product, although it is beautiful in the bathroom, it is easy to cause slipping in terms of safety.
In addition, if it breaks, it can easily lead to water channeling, and then it needs to be replaced.
It is recommended to pave ceramics such as floor tiles.
-
Anonymous users2024-01-231. All are not recommended, because the leather is a plastic product, although it is beautiful in the bathroom, it is easy to cause slipping in terms of safety.
In addition, if it breaks, it can easily lead to water channeling, and then it needs to be replaced.
It is recommended to pave ceramics such as floor tiles.
-
Anonymous users2024-01-22Yes, but the floor leather is easy to rot and moldy, so it is not recommended to lay the floor leather.
-
Anonymous users2024-01-21Yes, floor leather is susceptible to decay due to water immersion.
After the toilet is waterproofed, it can be covered with floor heating for about half a month. At this time, the waterproof materials have all dried, and you can install underfloor heating facilities.
After the geothermal pipe is laid and tested for pressure, it needs to be covered with fine debris such as ceramsite, and then plastered for protection, and then made a waterproof layer. Otherwise, there will be greater hidden dangers.
When the waterproofing is done, the waterproof material is basically dried and formed. To carry out a waterproof test, plug the possible leakage and floor drain, the ground can be stored water, the ground is full of water, the height should not exceed the temporary fence, wait for 24 hours after the release of water, check whether there is a leakage, if there is no leakage, let go of the stored water, you can pave the floor tiles.
It should be added, because with the daily bath, the running water is washing all the time, so be sure to take protective measures.
You are saying that after the bathroom is waterproofed, you put tiles on top of the tarp, and it always slides down, and the water return is slow, how to make him return to the water quickly, this situation cannot be solved, you can only flatten the bottom, and then paste it from the bottom to the top, so that it is slower.