What are the misunderstandings of buying hotel room furniture?

When we buy hotel room furniture, we must not completely listen to the salesperson's words to avoid entering the three major misunderstandings.

Myth 1: It is better to import plates.

When buying plate furniture, many consumers will be entangled in choosing domestic plates or imported plates, and some salesmen also spare no effort to promote imported plates: "The environmental performance of imported plates is the best." "But the price of imported plates is also about 20% higher than that of domestic plates.

Experts say: in terms of quality, the products of large domestic plate enterprises are not worse than some imported plates, and all plates that meet national standards should be passed in terms of environmental performance and usability. It can only be said that some exporting countries have a high level of quality control and relatively stable product quality.

Therefore, consumers do not have to be too superstitious, and it is better to choose according to their own financial ability.

Myth 2: Wear resistance can be measured with a keystroke.

When the salesman sells the high quality of the brand board finish, he often chooses to use the key to scratch back and forth on the surface of the board, and then point out to the consumer that there is no trace on the board, and the salesman uses a marker pen to write on the surface of the furniture and then easily wipe it off with a rag, so as to prove that the board has good stain resistance.

Experts say: The national standard has clear requirements for the wear resistance and stain resistance of the surface of the plate. The demonstration made by the salesman is actually the minimum performance that the surface of the plate should have, and it cannot explain the problem.

Because in the actual testing, the detection methods and conditions are much more stringent, such as stain resistance, the type of stain will have soy sauce, lipstick, etc. on the surface of the board for a certain period of time, and then look at the effect.

Myth 3: Neat edge sealing can seal formaldehyde.

When some salesmen introduce their own furniture products, they will let consumers observe the edge sealing of the furniture, and introduce that the edge sealing of the board is very tight, so that the formaldehyde is sealed in it and cannot come out, and less is released into the home. If the edge sealing of some small manufacturers is damaged, you have to be careful, and the formaldehyde has come out.

Experts say: whether the edge banding of man-made panels is tight has little impact on the release of formaldehyde, because even if it is tightly closed, formaldehyde will continue to be released, but the speed per unit time is slower. The edge sealing is damaged, the release speed is only accelerated, and the total amount of formaldehyde actually released is basically the same.

The impact of edge banding on aesthetics is greater, and in addition, strict edge banding can prevent the board from absorbing water and expanding after encountering water, and the phenomenon of edge expansion.

Answer: Myth 1: The choice of color.

In order to highlight the sense of design, some stores will choose some bright colors in the decoration of the guest room, and even think that the brighter the color can make the room brighter, but too bright colors are not suitable for the use of the guest room, and it is easy to affect the sleep quality of the occupants.

Myth 2: The choice of raw materials.

In order to facilitate transportation and installation and save costs, some hotel furniture buyers often tend to choose assembled hotel furniture. However, most of the raw materials of this kind of hotel furniture are wood-based panels, and if the material is not used properly, it is easy to cause high formaldehyde and affect the health of residents.

Myth 3: Blindly pursuing luxurious decoration.

The furniture decoration of the hotel room is mainly paint-based, the price of water-based paint is higher, some small manufacturers will choose ordinary paint in order to save production costs, ordinary paint smell is larger, and it is difficult to volatilize in a short time. Therefore, in the choice of hotel furniture, we should not only pay attention to its aesthetics, but also pay attention to the quality of the goods.

Myth 4: The more furniture in a hotel room, the better.

In order to distinguish different levels of room types, some hotel businesses tend to buy more hotel furniture in the purchase of hotel furniture, which will make the original spacious space crowded, and now modern people are keen on simple and modern hotel style, so in terms of the number of hotel furniture, the hotel furniture that is fine and simple and meets the needs of daily living is more likely to be favored by residents.

Do not use coarse cloth or old clothes to wipe furniture, it is best to use towels, cotton cloth, cotton fabrics or flannel cloth and other absorbent fabrics to wipe furniture. Coarse cloth, cloth with threads, or old clothes with stitches, buttons, etc., that can cause scratches on the surface of the furniture, should be avoided as much as possible. Do not use a dry rag to wipe the dust on the surface of the furniture Dust is made of fibers, sand and silica, and many people are used to using a dry rag to clean and wipe the surface of the furniture.

In fact, these fine particles have damaged the paint surface of the furniture in the friction of wiping back and forth. Although these scratches are minimal or even invisible to the naked eye, over time, the surface of the furniture will be dull and rough, and the light will no longer be visible. Do not use soapy water, dish soap or water to clean furniture Cleaning products such as soapy water and dish soap not only cannot effectively remove the dust accumulated on the surface of the furniture, but also cannot remove the silica sand particles before polishing, and because they are corrosive, they can damage the surface of the furniture and make the paint surface of the furniture dull.

At the same time, if moisture penetrates into the wood, it can also cause mold or local deformation of the wood, shortening the service life. A lot of furniture is made of fiberboard machine pressing, if moisture penetrates, the first two years because formaldehyde and other additives have not been completely volatilized, it is unlikely to mold. But once the additives volatilize, the moisture of the damp cloth will cause mold in the furniture, and if the residents on the lower floors live, the furniture at home may be "moldy" every year.

It is also important to note that even if some furniture is coated with piano lacquer, which can be properly scrubbed with clean water, do not leave a wet rag on the surface of the furniture for a long time to avoid moisture seeping into the wood. Furniture care spray wax can not be used to clean and maintain leather sofasMany furniture care spray wax instructions say that it can be used to maintain leather sofas, causing many housewives to make mistakes. And the salesperson in the furniture store knows that furniture care wax can only be used to spray the surface of wooden furniture, not on the sofa.

This is because leather sofas are actually animal skin, once sprayed with wax, it will cause the pores of leather products to clog, and over time, the leather will age and shorten its service life. In addition, some people apply some wax products directly to the furniture in order to make it look shinier, or use it improperly, which will make the surface of the furniture have foggy spots.