If the bathroom tiles are old, can they be directly attached to the old bricks? with structural adhe

It is recommended to use porcelain copy brick professional binder bonding can be, bai directly in the old brick du

Face paving. The specific construction plan is as follows:

Zhi first clean up the old brick surface, DAO clean, no oil, dust and other impurities, and then scrape a layer of strong ceramic tile special adhesive on the old brick surface, and scrape a layer of strong ceramic tile special adhesive on the back of the new tile, the direction is cross-shaped, that is, the old brick surface is a vertical batch, and the back of the new tile needs to be horizontally batched, and the use of sawtooth batch knife construction to save materials and increase the construction contact area. It is recommended not to use structural adhesives, because structural adhesives are organic materials, which have poor aging resistance and are easy to embrittle and fall off after a long time. The special adhesive for ceramic tiles is an inorganic material, and the aging resistance can reach 100 years without deterioration.

You can use it with confidence.

Structural adhesive can be used, but the cost is higher, e68a84e8a2ad62616964757a686964616f31333365643662 The speed of construction is not fast, the surface flatness is not easy to grasp, and the structural adhesive is an organic material, the aging resistance is very poor, and it is easy to embrittle and fall off after a long time; It is recommended to use ceramic tile professional adhesive to bond, ceramic tile adhesive is mainly used for pasting ceramic tiles, face tiles, floor tiles and other decorative materials, widely used in interior and exterior walls, floors, bathrooms, kitchens and other building finishing decoration places. Its main characteristics are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction, which is a very ideal bonding material.

Structural adhesive structural adhesive refers to high strength (compressive strength: 65MPa, steel-steel tensile bonding strength: 30MPa, shear strength: 18MPa), can withstand large loads, and is resistant to aging, fatigue, corrosion, stable performance in the expected life, and is suitable for bonding structural parts with strong strength.

Advantages of use. The non-structural adhesive has low strength and poor durability, and can only be used for ordinary and temporary bonding, sealing and fixing, and cannot be used for the bonding of structural adhesive parts.

The structural adhesive has high strength, peel resistance, impact resistance, and simple construction technology. It is used for bonding between metal, ceramic, plastic, rubber, wood and other materials of the same or different materials. It can partially replace traditional connection forms such as welding, riveting, bolting, etc.

The stress distribution of the joint surface is uniform, and there is no thermal influence and deformation on the part.

Structural adhesives are widely used in engineering, mainly used for reinforcement, anchoring, bonding, repair, etc. Such as sticking steel, sticking carbon fiber, planting reinforcement, crack reinforcement, sealing, hole repair, road nail pasting, surface protection, concrete bonding, etc.

Structural adhesive can be used, but the cost is high, the speed of construction is not fast, and the flatness of the surface is not easy to grasp. Now there is a building material called tile renovation putty, use it to scrape directly to the wall, and wait until it is dry, and then use tile adhesive or cement grout to paste the tile according to the normal construction method, and the effect is very good.

Don't pave directly, it is recommended to knock out the old tiles, anyway, those toilet fixtures and the like are the same to get up, and knock off and then pave to save the limited space in the bathroom, thank you.

Structural adhesives can be used.

But the cost is higher, and the speed of construction is not fast, and the surface.

The flatness is not easy to grasp, and the structural adhesive is an organic material, which has poor aging resistance, and is easy to embrittle and fall off after a long time; It is recommended to use ceramic tile professional adhesive to bond it, ceramic tile adhesive.

It is mainly used for pasting tiles

Decorative materials such as face tiles and floor tiles are widely used in interior and exterior walls, floors, bathrooms, kitchens and other building decoration places. Its main features are:

Bond strength. High water resistance, freeze-thaw resistance, good aging resistance and convenient construction, it is a very ideal bonding material.

Structural adhesive Structural adhesive refers to high strength (

Compressive strength. 65MPa, steel-steel forward tensile bonding strength》30MPa, shear strength.

18MPa), which can withstand large loads, and is resistant to aging, fatigue and corrosion, and has stable performance in the expected life, and is suitable for bonding structural parts with strong strength.

Advantages of use. Non-structural adhesives have low strength and poor durability, and can only be used for ordinary and temporary bonding, sealing, and fixing, and cannot be used for structures.

Glue bonding. The structural adhesive has high strength, peel resistance, impact resistance, and simple construction technology. It is used for bonding between metal, ceramic, plastic, rubber, wood and other materials of the same or different materials. It can be partially replaced by welding

Riveting, bolting and other traditional connection forms. The stress distribution of the joint surface is uniform, and there is no thermal influence and deformation on the part.

Structural adhesives are widely used in engineering, mainly used for reinforcement, anchoring, bonding, repair, etc. As.

Sticky steel, sticky carbon fiber, planting bars, crack reinforcement, sealing, hole repair, etc

Road stud pasting, surface protection, concrete bonding, etc.

Answer: Yes, as long as the height of the space in the home is okay. You can use the best tough tile adhesive in tile adhesive, and stick the bricks on the bricks as long as you follow the product instructions to stick the new tiles very firmly. (However, it will raise the ground by a few centimeters.)

In particular, it is recommended that this kind of tough tile adhesive still has a certain technical content and cost accounting, and it is not a general waterproof manufacturer that can produce and provide products with real performance. It is recommended to choose these big brands with absolute technology: JCDecaux, Leibonshi, Mapei, etc.

How to use tile adhesive: first check whether the old tiles are firm, remove the loose tiles, and clean the contaminated tiles with detergent or high-pressure water; chiseling the surface of old tiles; Paste the tile adhesive after mixing it in proportion.