There is a wooden partition in the bathroom, how to make it waterproof

Updated on Bathroom 2024-09-09
4 answers
  1. Anonymous users2024-01-24

    Hello! How to deal with the wooden board is not waterproof, it is recommended that you customize the tempered glass outside, the height should not be less than 2 meters, the whole is attached to the wooden board, and the surrounding glass, especially the ground, is beaten to death with waterproof sealant, so that it is waterproof, and it can be cleaned.

    Hope it helps, hopefully.

  2. Anonymous users2024-01-23

    I don't know what the specific situation is, the house is rented or their own, first of all, the wooden partition is in the bathroom, it is easy to deform by moisture, cracks will easily appear between the ground and the wooden partition, it is difficult to do a good job of waterproofing, if there is no moisture or water vapor, it is better to negotiate with your neighbors to replace it with a keel cement pressure plate, and then do waterproofing. It depends.

  3. Anonymous users2024-01-22

    How to deal with the wooden board is not waterproof, it is recommended that you customize the tempered glass outside, the height should not be less than 2 meters, the whole is attached to the wooden board, and the surrounding glass, especially the ground, is beaten to death with waterproof sealant, so that it is waterproof, and it can be cleaned.

  4. Anonymous users2024-01-21

    Wooden partitions can also be done.

Related questions
How to build a bathroom on a wooden board to waterproof? Is there a detailed process, what to do in
1 answers2024-09-09

Dig the best permeable waterproofing can be done by yourself. >>>More

Make sliding doors or partitions in the bathroom
3 answers2024-09-09

Hello, the above is a suspended ceiling that can also be installed with sliding doors, without much impact. Now I don't know if the floor of your bathroom has been done, if you don't do the floor, first reserve the position of the sliding door The ground is as flat as possible I can do it I don't know where you are?

How to do waterproof in the bathroom?
4 answers2024-09-09

Bathroom waterproofing, first of all, the standard approach is that the ground needs to be done all, the wall should be at least meters recommended to do full height, if I light wall then must be done full height. >>>More

How to make the bathroom waterproof
10 answers2024-09-09

If you're worried about water leakage, the most direct way is to test the water. If there is a water mark on the root of the pipe, it must be that he didn't wrap the pipe for you, or he didn't make it tight. If you want to paint yourself, you can buy some polyurethane, but you don't use much of that, and most of it is sold in barrels. >>>More

Do the bathroom waterproof or partition first
2 answers2024-09-09

If you don't do waterproofing first, the gap between the partition and the ground will leak later, so be sure to do waterproofing first.