-
Anonymous users2024-01-24I think it should be considered comprehensively:
You can choose whether the sofa, coffee table and other decorations in the living room can cover the staggered seams. If it can be covered, it does not need to be resurfaced; If it is still exposed in a conspicuous position, it must be required to resurface the renovated unit.
-
Anonymous users2024-01-23Look at the area, is it big? If it's just a few staggered seams, then smash the individual from the shop.
Generally, it will not affect the opening and closing of the door, because nearly 1CM is reserved when the carpenter measures and installs the door. The joints of the floor and floor tiles should be edge-sealed, otherwise they will not be beautiful and moisture-proof. If you want to sand, even if you smooth out the seams, there is still no way to make the two sides seamless.
The main purpose of nailing is to stabilize the floor and prevent it from deforming. The structure of the multi-layer solid wood floor, you can see the cross-section, the horizontal and vertical staggered, the stability is very good, the normal paving does not need to hit the nails, people will not move to the floor when they walk on it, and there is generally no problem with the lock on the edge, in case the piece is broken in the future, it is easy to change, but there are more homes at home, it is best to hit some nails, insurance points.
It's 5CM taller, and I can't fix it, and the feng shui is not very clear.
After the bathroom is paved with floor tiles, it can be as flat as the living room after being paved with tiles (it should be explained and confirmed before construction). But usually the bathroom is 10 mm lower than the living room.
The thickness of the two types is different, the thickness of the solid wood floor is 18mm, the solid wood parquet is 15mm, and the reinforced composite composite board is divided into 8mm and 12mm, which can be seen.