-
Anonymous users2024-01-24If you have a lot of money, you can do it all over the side, or one in the middle, and two pieces on both sides, which will look better in style and effect.
-
Anonymous users2024-01-23Most of the bedside is 100-200 wide, and the upholstery is at the same level as the bedside.
The edge line is 30-40 cm outward, and 70 cm above the ground is fine.
There are all kinds of sizes. It depends on the style of your bed. If it is delicate, use the small, rough and atmospheric use the big, and the Korean style is big.
The bedside switch is generally recommended to be on a horizontal line with the socket, the original ground height is 850mm, and the height after the floor is paved is 800mm, so that the bedside table can be against the wall, and the distance between the switch box socket and the bedside should be considered, the width of the bed is 1.8 meters, the width is 1.9 meters, the width of the bed we are talking about is the width of the mattress, and it is also necessary to consider whether it is a modern bed or a European-style bed, that is, there is no bedside backrest, so as not to switch too far away, out of reach.
If your wall is south or north, it's okay, if it's an east-west wall, I suggest you still put the head of the bed on the wall, because the direction of the bed is best to put it in the north-south direction, which is good for the body, and long-term sleep in the east-west direction of the bed will have symptoms such as dizziness, irritability, insomnia, and cervical spine pain. >>>More
The stove should be pressed on the side close to the flue in order to discharge the smoke exhaust pipe into the flue, and the custom is to burn east and west, which must be these two directions. The developer should have designed the direction of the stove according to this custom a long time ago. If you're going to change it, that's another story.