-
Anonymous users2024-01-24You can screw on the ceiling keel to fix the bead curtain bracket, and the keel is a stress bracket, but too heavy will still cause aluminum alloy ceiling deformation.
The innermost strip of your photo is rubbed against the wall by hand, and then you can take it off, and the other edges of the board have self-tapping nails, which can be removed after being removed.
The downlight must be fixed with gong wire, and if the lamp is not large, you can add iron bars or wooden strips to the iron keel where the downlight is to be installed and then fix it with filament. If the lamp is heavier, it is best to make 6 wires directly from the roof and pass through the ceiling module, and the holes can be larger to prevent the wires from being cut. Suspended ceiling people know how to do it.
Ceiling lamps are relatively lightweight. Wooden screws (coarse) can be used directly. Drywall strength is enough.
1. The installation of the internal integrated ceiling lamp must be selected in a good position; There is good ventilation and lighting environment, and the condition of the wall itself should be checked to prevent the wall peeling phenomenon during the installation process. The ceiling is a must be inspected before installation, and these are the best operating platforms that can be used during construction and installation. Jiuzheng Home Network believes that light steel skeletons are generally used to make a protective measure in the ceiling. >>>More
As the name suggests, solid wood planks are wooden planks made from intact wood. These sturdy and natural textures make them the perfect choice for renovations. However, due to the high cost of such plates and the high requirements of construction technology, they are not used much in decoration. >>>More