-
Anonymous users2024-01-24Generally, it will not affect the opening and closing of the door, because nearly 1CM is reserved when the carpenter measures and installs the door. The joints of the floor and floor tiles should be edge-sealed, otherwise they will not be beautiful and moisture-proof. If you want to sand, even if you smooth out the seams, there is still no way to make the two sides seamless.
-
Anonymous users2024-01-23You should mainly consider whether the door can be closed, the 4 mm error is acceptable, and the copper cover plate added at the door is a must, otherwise the wooden floor will not be able to close the edge.
3 cm, the maximum general decoration master is mastered by 3 cm. >>>More
After the bathroom is paved with floor tiles, it can be as flat as the living room after being paved with tiles (it should be explained and confirmed before construction). But usually the bathroom is 10 mm lower than the living room.
During construction, the workers did not strictly follow the construction specifications, but only paid attention to the flatness of the pavement, but did not pay attention to the levelness of the construction. When carrying out ground engineering construction, it is necessary to determine the unified elevation line first, and use this as a benchmark to determine the height of the ground surface layer of each space. If you have more questions, you can click on ID to consult.
The living room of 20 square meters is levelly laid, and the paving is 800 * 800 such large bricks, there will be no error, even if there is at most three or two centimeters, more than half a centimeter must be qualified.
Removing the multi-purpose cement river sand, did the company overcharge you? The developer's house was poorly built, the ground was uneven, and it had to be heightened to level the bricks. Which mason is willing to go taller? >>>More